Removing the Wireless Card
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before Working Inside Your Computer" on page 7. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 9.
For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1Remove the base cover. See "Removing the Base Cover" on page 10.
2Remove the battery. See "Removing the Battery" on page 13.
Procedure
1Peel off the Mylar and conductive tape that cover the antenna cables.
2Disconnect the antenna cables from the wireless card.
3Remove the screw that secures the wireless card to the system board.
4Slide and remove the wireless card out of the
1
2
5
4
3
1 | screw | 2 | antenna cables (2) |
|
|
|
|
3 | Mylar and conductive tape | 4 | |
|
|
|
|
5 | wireless card |
|
|
|
|
|
|
Removing the Wireless Card 15
