Removing the Windows-Button Board

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before Working Inside Your Computer" on page 7. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 9.

For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance.

Prerequisites

1Remove the base cover. See "Removing the Base Cover" on page 10.

2Remove the battery. See "Removing the Battery" on page 13.

3Remove the display back-cover. See "Removing the Display Back-Cover" on page 40.

Procedure

1Remove the screws that secure the Windows-button board to the display panel.

2Turn the Windows-button board over and disconnect the Windows-button board cable from the board.

3Lift the Windows-button board off the display panel.

1

3

2

1

screws (2)

2 Windows-button board cable

3Windows-button board

Removing the Windows-Button Board 45

Page 45
Image 45
Dell XPSU125327CR manual Removing the Windows-Button Board