Dell XPSU125327CR manual Removing the Power-Adapter Port

Removing the Power-Adapter Port

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before Working Inside Your Computer" on page 7. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 9.

For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance.

Prerequisites

1Remove the base cover. See "Removing the Base Cover" on page 10.

2Remove the battery. See "Removing the Battery" on page 13.

Procedure

1Disconnect the power-adapter port cable from the system board.

2Remove the screw that secures the power-adapter port to the palm-rest assembly.

3Slide and release the power-adapter port cable from under the display hinge.

4Lift the power-adapter port off the palm-rest assembly.

34

2

1

1	power-adapter port	2	screw
3	display hinge	4	power-adapter port cable

Removing the Power-Adapter Port 31