DeLonghi EAM3200 instruction manual Preparing Espresso / Coffee Using Whole Coffee

Figure 13

Figure 14

Figure 12

EAM3200_manual_final 5/19/04 11:50 AM Page 17

•Turned the machine on by pressing the on/off button.

•The green and lights are on steadily (not flashing).

•Set the coffee flavor, coffee quantity and coffee grinder (if using coffee beans) dials to the desired level.

17

Figure 11

12.1 Preparing Espresso / Coffee (Using Whole Coffee

Beans) Note: When using the machine for the first time, 4 to 5

cups of espresso / coffee needs to be made before the machine delivers satisfying results.

1. Fill the water tank with water and the coffee bean container with coffee beans, according to the directions listed in

sections 11.1 and 11.3 of the manual.

2.Place one empty cup under the spout to make one espresso / coffee (Figure 11) or two empty cups for two espressos / coffees (Figure 12).

Tip: Use cups that have been previously heated by rinsing them with hot water or by leaving them on the cup warmer for at least 20 minutes.

Note: For more tips on making coffee hotter, see “Tips on Making Hotter Coffee” section of the manual.

3.Make sure to lower the adjustable coffee spout if the cups are small (Figure 13). For larger cups, push the adjustable coffee spout up to accommodate the size.

4.Press the button (Figure 14) to make one cup of

espresso / coffee or the button (Figure 15) to

make two espressos / coffees.

5. The machine will now grind the beans, run a short pre-brewing cycle, pause and then complete the delivery.

Note: While the machine is preparing the espresso / coffee, the delivery can be terminated at any time

by pressing the button (Figure 14) or the button (Figure 15), as previously selected.

6. Once the desired quantity is reached, the machine will automatically terminate espresso / coffee delivery and discharge the grounds into the used coffee