Denon AVR-1909 Speaker Installation, Speaker Connections, Speaker Connections

Speaker Connections

Speaker Installation

The illustration below shows a basic example of installation of the amplifier combined with 8 speakers and a monitor.

Subwoofer Center speaker

Surround back speakers

Front speakers

Place the front speakers to theSurround speakers sides of the monitor or screen and

as flush with the screen surface as possible.

The table below shows a typical speaker configuration for the AVR-1909.

	FRONT		CENTER	SURROUND		SURROUND BACK			SUBWOOFER
	L	R		L	R	L	R	1 speaker
7.1-channels	S	S	S	S	S	S	S	–	S
(FRONT A+B)
7.1-channels	S	S	S	S	S	S	S	–	S
6.1-channels	S	S	S	S	S	–	–	S	S
5.1-channels	S	S	S	S	S	–	–	–	S
3.1-channels	S	S	S	–	–	–	–	–	S
2.1-channels	S	S	–	–	–	–	–	–	S
2-channels	S	S	–	–	–	–	–	–	–

ENGLISH

Speaker Connections						Getting
Example: 5.1/7.1-channels
						Started
Subwoofer	Front speakers			Center speaker
	A					Connections
Subwoofer
with built-
in amplifier
	(L)	(R)				Setup
*/	w q w	q		w	q
						Playback
						Control Remote
						zone-Multi
b L : Left						Information
R : Right						Troubleshooting
		(L)	(R)	(L)	(R)
		w	q w q	w	qw q	Specifications
				speakers are connected
		Surround speakers		Surround back
				speakers
				When surround back
NOTE

For surround back speakers :

•Since “Amp Assign” of AVR-1909 is set to “ZONE2” by default, audio is not output from the surround back speakers. When using the surround back speakers with MAIN ZONE, change the “Amp Assign” setting to “7.1ch” (vpage 35).

•When using just one surround back speaker, connect it to the left channel (SBL).

For ZONE2 speakers :

•For multi-zone connection and operation, see “Amp Assign / Multi-zone Connections and Operations” (vpage 69 ~ 72).

10