Denon AVR-1909 gInput Mode, Input Mode, Decode Mode, Operating from the main unit or main remote control unit

ENGLISH

Getting	gInput Mode
	Make input mode and decode mode settings for this source.
Started	The selectable input modes depend on the input source and
	“Assign” setting (vpage 42).
	Input Mode
	Set the input mode for this source.

•When a digital signal is properly input, the “” indicator lights on the display. If the “” indicator does not light, check the digital input connector assignment and the connections.

•The surround mode cannot be set if the input mode is set to “EXT. IN”.

•Only set “PCM” and “DTS” when playing the respective signals.

hRename

Change the display name for this source.

Names containing up to 8 characters can be input.

[Characters that can be input]

A ~ Z a ~ z 0 ~ 9 ! # % & ’ ( ) * + , - . / : ; = “ ? @ [ \ ] (space)

Connections	[Input source]		TUNER
Setup	[Selectable items]
	Analog : Play only signals from analog input.
Playback
	EXT. IN : Play only signals from EXT. IN input.
Remote	[Input source]		XM
	[Selectable items]
Control	Auto : Automatically detect input signal and perform playback.
	EXT. IN : Play only signals from EXT. IN input.
-Multi	[Input source]		CD CDR/TAPE DVD HDP TV/CBL VCR
zone
			V.AUX SIRIUS
Information	[Selectable items]
	Auto	: Automatically detect input signal and perform playback.
	HDMI z1: Play only signals from HDMI input. (Excluding CD and
Troubleshooting
		SIRIUS)
	Digital z2 :Play only signals from digital input.
	Analog : Play only signals from analog input.
	EXT. IN : Play only signals from EXT. IN input.

Operating from the main unit or main remote control unit

Press <INPUT MODE> or [INPUT].

Each time you press the button, the input mode display will change.

	z1	z2
Auto	HDMI	Digital

EXT. IN Analog

z1: This can be selected for input sources for which the menu “Assign” setting is set to “HDMI In”.

z2: This can be selected for input sources for which the menu “Assign” setting is set to “Digital In” (vpage 42).

Decode Mode

Set the decode mode for this source.

[Input source] CD CDR/TAPE DVD HDP TV/CBL VCR V.AUX

[Selectable items]

Auto : Detect type of digital input signal and decode and play automatically.

PCM : Decode and play only PCM input signals.

DTS : Decode and play only DTS input signals.

Default

Resets the settings to the default values.

jSource Level

Corrects the playback level of the selected input source’s audio input.

[Variable range] –12dB ~ 0dB ~ +12dB

For input sources for which “HDMI In” and “Digital In” are set at the menu “Assign” setting, the analog input level and digital input level can be set separately.

Specifications	z1: This can be selected for input sources for which the menu
	“Assign” setting is set to “HDMI In”.
	z2: This can be selected for input sources for which the menu
	“Assign” setting is set to “Digital In” (vpage 42).

•This can be selected for input sources for which the menu “Assign” setting is set to “HDMI In” or “Digital In” (vpage 42).

•Only set “PCM” and “DTS” when playing the respective signals.

41For details on how to select, set and cancel settings for each menu, see “Menu Operations” (vpage 22).