Denon AVR-1909 manual 86

ENGLISH

Getting

GRemote Control UnitH

Symptom

Cause

Countermeasure

Page

Started

Set does not work

• Batteries are worn.

• Replace with new batteries.

3

properly when

• You are operating outside of the

• Operate within

the specified

3

remote control

specified range.

range.

Connections

unit operated.

• Obstacle between main unit and

• Remove the obstacle.

battery

3

by the polarity marks in the

polarity

marks

in the

remote control unit.

• The batteries are not inserted in

• Insert

the

batteries

in

the

3

the proper direction, as indicated

proper

direction,

following

the

Setup

battery compartment.

compartment.

• The set’s remote control sensor

• Move the set to a place in which

3

is exposed to strong light (direct

the remote control sensor will

Playback

sunlight, inverter type fluorescent

not be exposed to strong light.

bulb light, etc.).

• The remote ID of the main unit

• Set “Remote ID” for the main

36

and remote control unit do not

unit to “1”.

Remote

match.

GAudioH

Control

Symptom

Cause

Countermeasure

Page

No sound is

• You

are playing

a

monaural

• The mode is set to something

45

-Multi

produced from

source (TV, AM radio broadcast,

other than “STANDARD” (Dolby/

center speaker.

etc.) in the “STANDARD” (Dolby/

DTS Surround).

zone

DTS Surround) mode.

No sound

• The

surround

mode

is set to

• Set

to

a

surround

playback

45, 46

Information

is produced

“STEREO”, “DIRECT” or “PURE

mode.

from surround

DIRECT”.

speakers.

No sound is

• The

surround

back

speaker’s

• Check the setting and change it

35

produced from

power amplifier is assigned to a

as necessary.

Troubleshooting

surround back

different channel.

speaker.

• Surround back speaker setting is

• Set

to

something other than

30

set to “None”.

“None”.

• The

“Parameter”

–

“Surround

• Please

set

“Parameter”

–

48, 49

Parameter” – “SB CH Out”

“Surround

Parameter”

–

“SB

settings are “OFF”.

CH Out” to settings other than

Specifications

“OFF”.

• Surround mode not set to a mode

• Select

a

surround

playback

44 ~ 46

for 6.1- or 7.1-channel playback.

mode.

Symptom			Cause					Countermeasure	Page
No sound is	• Subwoofer’s power not					turned		• Turn on the subwoofer’s power.	–
produced from	on.
subwoofer.	• The	“Subwoofer”			setting		at	• Set to “Yes”.	29
	“Speaker Configuration” is set to
	“No”.
	• The	subwoofer		is	not properly			• Check the connections.	10
	connected.
	• The	subwoofer’s			volume		is	• Adjust the subwoofer’s volume	63
	turned off.							to an appropriate level.
No test tones are	• Surround		mode		not	set	to	• Set to the “STANDARD” (Dolby/	45
produced when	“STANDARD”				(Dolby/DTS			DTS Surround) mode.
main remote	Surround).
control unit’s
TEST button is
pressed.
DTS sound is not	• Blu-ray Disc player / DVD player’s							• Set the Blu-ray Disc player / DVD	–
output.	audio output setting is not set to							player. For details, refer to the
	bitstream.							Blu-ray Disc player / DVD player’s
								operating instructions.
	• Blu-ray Disc player / DVD player is							• Use a DTS-compatible player.	–
	not compatible with DTS sound
	playback.
	• The AVR-1909’s “Decode Mode”							• Set to the “Auto” or “DTS”	41
	setting is set to “PCM”.							mode.
HDMI audio	• The “Manual Setup” – “HDMI							• Set to “AMP”.	32
signals are not	Setup” – “HDMI Audio Out”
output from	setting is set to “TV”.
speakers.
No sound is	• The “Manual Setup” – “HDMI							• Set to “TV”.	32
output from	Setup” – “HDMI Audio Out”
the monitor	setting is set to “AMP”.
connected
with HDMI
connections.
Dolby TrueHD,	• HDMI is not connected.							• Connect the HDMI.	12, 13
DTS-HD, Dolby	• Blu-ray Disc player’s audio output							• Set the Blu-ray Disc player. For	–
Digital Plus audio	setting is not set to bitstream.							details, refer to the Blu-ray Disc
is not output.								player’s operating instructions.
	• Blu-ray Disc			player		is	not	• Use a DTS-compatible player.	–
	compatible		with		DTS	sound
	playback.

83