Multi-zone

ZONE2 out Connections

If another pre-main (integrated) amplifier is connected, the ZONE2 out connectors can be used to play a different program source in ZONE2 at the same time (vpage 69 ~ 72).

Pre-main amplifier

(ZONE2)

"6%*0

"6%*0

*/

- 3

L R

L R

Extension jack for future use.

(Connect devices corresponding with room to room function to this jack.)

"69

Input

Output

065

 

Infrared

 

Infrared

retransmitter

 

sensor

NOTE

•For the audio output, use high quality pin-plug cords so that no induction humming or noise is produced.

•For instructions on installing and operating separately sold devices, refer to the respective devices’ operating instructions.

•To conduct multi-zone playback, see “Amp Assign / Multi-zone Connections and Operations” (vpage 69 ~ 72).

ENGLISH

External Controller

RF remote receiver

3$3$*

•When using in combination with an RF Remote Controller (RC-7000CI, sold separately) or RF Remote Receiver (RC-7001RCI, sold separately) two-way communication with an RF Remote Controller is possible.

The AVR-1909’s status information as well as iPod can be browsed watching the RF Remote Controller’s display. For details, refer to the operating instructions of the respective devices.

•When used in combination with an RF Remote Controller or RF Remote Receiver, make the settings at menu “Manual Setup” – “Option Setup” – “2Way Remote” – “Used” (vpage 36).

Specifications Troubleshooting Information zone-Multi Control Remote Playback Setup Connections Started Getting

20