ENGLISH

Connecting an external control device

Playback (Basic operation)

nnUsing the “Source Select” menu

REMOTE CONTROL jacks

If this unit is installed in a location that is out of range of the signal from the remote control unit, you can still operate the unit and the devices connected to it by using a commercially available IR receiver. You can also use it to remotely control ZONE2 (another room).

Infrared Infrared

retransmitter sensor

Device equipped with a

REMOTE CONTROL IN jack

AUX

Input

Output

 

OUT

 

 

nn Selecting the input source (vpage 20) nn Adjusting the master volume (vpage 21)

nn Turning off the sound temporarily (vpage 21)nn Playing a Blu-ray Disc player/DVD player

(vpage 21)

nn Playing a CD player (vpage 21) nn Playing an iPod® (vpage 22)nn Tuning in radio stations (vpage 25)nn Playing a USB memory device (vpage 27)Selecting a listening mode (Surround mode)(vpage 28)Playback (Advanced operation) (vpage 36)

Important information

Before starting playback, make the connections between the different components and the settings on the receiver.

q Press SOURCE SELECT.

Display the “Source Select” menu.

Source Select

HD Radio

 

SAT/CBL

CD

 

 

GAME

BD

 

V.AUX

DVD

 

DOCK

TV

 

 

 

The currently selected input source

 

 

 

 

 

[]:Source is highlighted. [ENT]:Select

w Use uio p to select the input source, then press ENTER.

The input source is set and the source selection menu is turned off.

When using with an iPod connected directly to the USB port of this unit, select “USB/iPod” for the input source.

Input sources that are not going to be used can be set ahead of time. Make this setting at “Source Delete” (vpage 59).

To turn off the source selection menu without selecting an input source, press SOURCE SELECT again.

NOTE

Also refer to the operating instructions of the connected components when playing them.

Selecting the input source

Press the input source select button

(NET/USB, iPod, DVD, BD, TUNER, DOCK, SAT/CBL, GAME, V.AUX, CD, TV) to be played back.

The desired input source can be selected directly.

• When iPod PLAY is pressed, the input source of this unit is switched to “DOCK” or “USB/iPod” and the connected iPod is automatically played (vpage 25 “iPod play function”).

You can also use the following operation to select an input source.

nnUsing the knob on the main unitTurn SOURCE SELECT.

Turning SOURCE SELECT switches the input source, as shown below.

BD DVD TV SAT/CBL GAME

CD HD Radio USB/iPod DOCK V.AUX

20