Denon AVR-1911 61

ENGLISH

Manual Setup

Setting items	Setting details

2ch DIRECT/STEREO	Distance FL / Distance FR : Select the speaker.
(Continued)	• 0.0ft – 60.0ft (12.0ft) / 0.00m – 18.00m (3.60m) : Set the distance to
	the speaker.
	Set so that the difference between the front left speaker and front
	right speaker distances is 20.0 ft (6.0 m) or less.
	Level FL / Level FR : Select the speaker.
	• –12.0dB – +12.0dB (0.0dB) : Adjust the level of each channel.
Auto Surround Mode	ON : Memorize settings. Automatically play with the last used surround
Make setting for	mode.
memorizing surround mode	OFF : Do not memorize settings. Surround mode does not change
setting for each input signal	according to input signal.
type.

• The auto surround mode function lets you store in the memory the surround mode last used for playing the four types of input signals listed below.

q Analog and PCM 2-channel signals

w Dolby Digital and DTS 2-channel signals e Dolby Digital and DTS multi-channel signals r LPCM Multi-channel signals

• When playing in PURE DIRECT, the surround mode does not change even if the input signal is changed.

ZONE2 SetupDefault settings are underlined.

Set the audio to play back with ZONE2.

“ZONE2 Setup” is displayed when “ZONE2” is selected with “Amp Assign”.

Setting items	Setting details

Level Lch	–12dB – +12dB (0dB)
Adjust the left channel
output level.
Level Rch	–12dB – +12dB (0dB)
Adjust the right channel
output level.
Volume Limit	OFF : Do not set a maximum volume.
Make a setting for	–20dB (61) / –10dB (71) / 0dB (81)
maximum volume.	This is displayed from 0 – 99 when “Volume Display” (vpage 59) is

	set to “Absolute”.
Power On Level	Last : Use the memorized setting from the last session.
Define the volume setting	– – – (0) : Always mute when power is turned on.
that is active when the	–80dB – 18dB (1 – 99) : The volume is adjusted to the set level.
power is turned on.	This is displayed from 0 – 99 when “Volume Display” (vpage 59) is

	set to “Absolute”.
Mute Level	Full : The sound is muted entirely.

EQ Customize

Set so that unused equalizer

settings are not displayed when MULTEQ is pressed.

The equalizer mode in which “Not Used” is selected cannot be stored and recalled in the Quick Select function.

Audyssey Byp. L/R : Set when not using “Audyssey Byp. L/R” equalizer.

•Used : Use.

•Not Used : Do not use.

Set so that “Audyssey Byp. L/R” settings can be made when Audyssey Auto Setup is performed.

Audyssey Flat : Set when not using “Audyssey Flat” equalizer.

•Used : Use.

•Not Used : Do not use.

Set so that “Audyssey Flat” settings can be made when Audyssey Auto Setup is performed.

Manual : Set when not using the “Manual” equalizer.

•Used : Use.

•Not Used : Do not use.

Set the amount of	–40dB : The sound is attenuated by 40 dB down.
attenuation when muting	–20dB : The sound is attenuated by 20 dB down.
is on.