Denon AVR-1911 Use, Use, SLEEP, SLEEP, Press, Simple, ENGLISH, using o p, ZONE SELECT, Information, operation mode, 3 Press CH LEVEL, (Fader function), 3 Press CH LEVEL

Sleep timer function

The power automatically goes into standby once the set time has elapsed.

This is convenient for playing sources while going to sleep.

Press SLEEP and display the time you want to set.

The “SLEEP” indicator on the display lights.

• The time switches as shown below each time SLEEP is pressed.

OFF 10 min 20 30 40 50

120 110 100 90 80 70 60

To cancel the sleep timer

Press SLEEP to set “OFF”.

The “SLEEP” indicator on the display turns off.

•The sleep timer setting is canceled if this unit’s power is set to standby or turned off.

•When power to the main zone is

turned off with the sleep timer,

power in ZONE2 is also turned off.

• If SLEEP on the main unit is pressed, the same function as with the remote control unit can be obtained.

Adjusting the volume of the speakers

You can adjust the channel level either according to the playback sources or to your taste, as described below.

nnAdjusting the volume of the different speakers

1 Press ZONE SELECT to switch the zone mode to “MAIN”.

The “MAIN” indicator lights.

2 Press AMP to set the remotecontrol unit to amplifier operation mode.3 Press CH LEVEL.

Fader

FRONT : REAR

[ ]:CH Sel.

4 Use ui to select the speaker. The speaker that can be set switches each time one of the buttons is pressed.

5 Use o p to adjust the volume.

•In the case of a subwoofer, pressing o when it is at “–12 dB” will change the setting to “OFF”.

When a headphone jack is inserted, the headphone channel level can be adjusted.

		ENGLISH
		Convenient functions
nnAdjusting the volume of groups of speakers			Simple
(Fader function)
This function lets you adjust (fade) the sound all at once from the			version
front (front speaker / front height speaker / center speaker) or rear
(surround speaker / surround back speaker).
Press ZONE SELECT to switch the
1 zone mode to “MAIN”.
The “MAIN” indicator lights.			Basic
Press AMP to set the remote
2 control unit to amplifier			version
operation mode.

3 Press CH LEVEL.
	Channel Level
FL	0.0dB SR	0.0dB

C0.0dB SBR 0.0dB

FR	0.0dB	SBL	0.0dB
SW	0.0dB	SL	0.0dB

		Fader	Advanced
		FRONT : REAR
	[	]:CH Sel.	version
	Use	i to select “Fader”, then	version
4 select the item to be adjusting
	using o p.
5	Use o p to adjust the volume of the speakers.
5	(o : front, p: rear)

•The fader function does not affect the subwoofer.

•The fader can be adjusted until the volume of the speaker is adjusted to the lowest value of -12 dB.

Information