Denon AVR-1911 1 –, CH +, CH –, NOTE, SHIFT, ENTER, ENGLISH, want to preset, 2 Press MEMORY, 1 Press SEARCH, Default settings, Tuning in radio stations

ENGLISH

Tuning in radio stationsnnPresetting radio stations (Manual preset)

Your favorite broadcast stations can be preset so that you can tune them in easily. Multicasts can also be preset. Up to 56 stations can be preset.

•Stations can be preset automatically at “Auto Preset” (vpage45).If“Auto Preset” is performedafterperforming“Manual Preset”, the “Manual Preset” settings will be overwritten.

1Tune in the broadcast station youwant to preset.2 Press MEMORY.

3 Press SHIFT to select the block (A to G) in which the channel (1 to 8 per a block) is to be preset, then press CH +, CH – or 1 – 8 to select the preset number.

4 Press MEMORY again to complete the setting.

• To preset other stations, repeat steps 1 to 4.

Default settings

Block (A – G)
and		Default Settings
Channel (1 – 8)
A1	– A8	87.5 / 87.9 / 89.1 / 93.3 / 97.9 / 98.1 / 98.9 /
		100.1 MHz
B1	– B8	101.9 / 102.7 / 107.9 / 90.1 / 90.1 / 90.1 / 90.1
		/ 90.1 MHz
C1	– C8	530 / 600 / 930 / 1000 / 1120 / 1210 / 1400 /
		1710 kHz
D1	– D8	90.1 MHz
E1	– E8	90.1 MHz
F1	– F8	90.1 MHz
G1	– G8	90.1 MHz

Specify a name for the preset broadcast station (Preset Name) (vpage 46)

nnListening to preset stations1 Press SHIFT to select the memory block (A to G).2 Press CH +, CH – or 1 – 8 to select the desired preset channel.

You can also operate via the main unit. In this case, perform the following

operations.

Press TUNING PRESET, then turn SOURCE SELECT to select the preset radio station.

nnDirect frequency tuning

You can enter the receiving frequency directly to tune in.

1 Press SEARCH.2 Input frequencies using the 0 – 9.

• If o is pressed, the immediately preceding input is cancelled.

3 When setting is completed, pressENTER.

The preset frequency is tuned in.

nnCheck the HD Radio reception informationPress STATUS while an HD Radio broadcast is being received.

The current reception information is shown on the display.

Normal Frequency

Genre name	Signal strength
Album name	Station name
Artist name	Program and Program type
	Title name

NOTE

If the station signal weakens while receiving a digital broadcast (while text is displayed), the mode automatically switches to the analog reception mode (the reception frequency is displayed).

Because of this, the text may flicker if the station signal level is weak and unstable.

nnTuner (HD Radio reception) operation

Operation buttons	Function
CH +, –	Preset channel selection
MENU	Amp menu
uiop	Cursor operation /
	Multicast switching (ui)
ENTER	Enter
SEARCH	Direct frequency tuning
RETURN	Return
BAND	FM/AM switching
MODE	Switch search modes
TUNING df	Tuning (up/down)
0 – 9	Preset channel selection (1 – 8) /
	Direct frequency tuning (0 – 9)
SHIFT	Preset channel block selection
MEMORY	Preset memory registration
TV POWER	TV power on/standby (Default : SONY)
TV INPUT	Switch TV input (Default : SONY)

26