Denon AVR-1911 Menu operation, Items that can be set with the Manual Setup procedure

Press MENU.

The menu is displayed on the TV screen.

The “MAIN” indicator lights.

ENGLISH

Manual Setup

Set when changing Audyssey® Auto Setup settings, or when changing the audio, video, display or other settings.

•If you change the speaker settings after performing Audyssey Auto Setup, it will not be possible to set MultEQ®, Dynamic EQ® and Dynamic Volume™ (vpage 51, 52).

•Can be used without changing the settings. Please set if necessary.

Menu operation

1 Press ZONE SELECT to switch the zone mode to “MAIN”.

2 Press AMP to set the remote control unit to amplifier operation mode.

3

4 Press ui to select the menu to be set or operated.

5 Press ENTER to enter the setting.

•To return to the previous item, press RETURN.

•Exiting the Menu, press MENU while the menu is displayed. The menu display disappears.

Items that can be set with the Manual Setup procedure

Speaker Setup Default settings are underlined.

Perform when setting the speakers manually or when changing settings made in Audyssey Auto Setup.

•If you change the speaker settings after performing Audyssey Auto Setup, it will not be possible to select MultEQ, Dynamic EQ and Dynamic Volume (vpage 51, 52).

•Manual Setup can be used without changing the settings. Please set if necessary.

Setting items	Setting details
Amp Assign	Normal : Set when using 7.1-channel (Front/Center/Surround/Surround
Set the speakers connected	Back/Subwoofer) speakers.
to this unit.	ZONE2 : Set for connecting the speakers for ZONE2 to the SURR. BACK/
	AMP ASSIGN terminals.
	Front Height : Set for connecting the front height speakers to the SURR.
	BACK/AMP ASSIGN terminals.
	Front Bi-Amp : Set for connecting a tweeter of a front speaker to the
	SURR. BACK/AMP ASSIGN terminals and a woofer of the front speaker to
	the FRONT terminals.
	Front B : Set for connecting the second front speakers to the SURR.
	BACK/AMP ASSIGN terminals. In this case, make settings for “Front
	Speaker Setup” (vpage 56).
	Since “Amp Assign” of this unit is set to “ZONE2” by default, audio is
	not output from the surround back speakers. When using the surround
	back speakers with MAIN ZONE, change the “Amp Assign” setting to
	“Normal”.
Speaker Config.	Front : Set the front speaker size.
Select speaker configuration	• Large : Use a large speaker that can adequately play back low
and size (bass reproduction	frequencies.
capability).	• Small : Use a small speaker that has inadequate playback capacity for
NOTE	low frequencies.

Speaker Setup (vpage 54)		HDMI Setup (vpage 57)			Audio Setup (vpage 57)
4-1.Speaker Setup		4-2.HDMI Setup			4-3.Audio Setup
1.Amp Assign		Auto Lipsync		: ON	1.2ch Direct/Stereo
2.Speaker Config.		HDMI Audio Out : Amp			2.Auto Surround Mode
3.Bass Setting		HDMI Control		: OFF	3.EQ Customize
4.Distance
5.Channel Level
6.Crossover Freq.
[ENT]:Select [RTN]:Back			[RTN]:Back		[ENT]:Select [RTN]:Back
ZONE2 Setup (vpage 58)				Option Setup (vpage 59)
4-4.ZONE2 Setup				4-5.Option Setup
Level Lch	:	0dB		1.Volume Control
Level Rch	:	0dB		2.Source Delete
Vol.limit	: OFF			3.On-Screen Display
Power On Lev: Last				4.Remote Preset Codes
Mute Lev.	: Full			5.Quick Select Name
				6.ZONE Rename
				7.Display
	[RTN]:Back
			[ENT]:Select [RTN]:Back

Do not use the outward shape of the speaker to determine selection of a “Large” or “Small” speaker. Instead, use the frequencies set in “Crossover Frequency” (vpage 56) as the standard for determining bass reproduction capability.

•When “Subwoofer” is set to “No”, “Front” is automatically set to “Large”.

•When “Front” is set to “Small”, “Center”, “Surround“, “Surround Back” and “Front Height” can not be set to “Large”.

Center : Set the presence and size of the center speaker.

•Large : Use a large speaker that can adequately play back low frequencies.

•Small : Use a small speaker that has inadequate playback capacity for low frequencies.

•None : Select when a center speaker is not connected.

“Large” is not displayed when “Front” is set to “Small”.

Subwoofer : Set the presence of a subwoofer.

•Yes : Use a subwoofer.

•No : Select when a subwoofer is not connected.

When “Front” is set to “Small”, “Subwoofer” is automatically set to “Yes”.

54	Remote control operation	Move the cursor	Confirm the setting	Return to previous menu
	buttons	(Up/Down/Left/Right)