ENGLISH

DENON original surround playback

1 Playing27). the source (vpage 21 –2 Press SIMULATION to select the surround mode.

• Each time SIMULATION is pressed, the surround mode is switched.

MULTI CH This mode is for enjoying stereo sound from all

STEREO speakers.

ROCK ARENA This mode is for enjoying the atmosphere of a live concert in an arena.

JAZZ CLUB This mode is for enjoying the atmosphere of a live concert in a jazz club.

MONO MOVIE z This mode is for playing monaural movie sources with surround sound.

VIDEO GAME This mode is suited for achieving surround sound with video games.

MATRIX This mode lets you add a spacious feel to stereo music sources.

VIRTUAL This mode is for enjoying surround effects using only the front speakers or headphones.

zWhen playing sources recorded in monaural in the “MONO MOVIE” mode, the sound will be off balance with a single channel (left or right), so input to both channels.

Depending on the program source being played, it may not be possible to achieve a satisfactory surround effect. In this case, try other modes to achieve a sound field suited to your tastes.

NOTE

When the input signal is Dolby TrueHD, Dolby Digital Plus, DTS-HD or DTS Express, you cannot select DENON original surround mode.

Stereo playback

This is the mode for playing in stereo. The tone can be adjusted.

•Sound is output from the front left and right speakers and subwoofer.

•If multichannel signals are input, they are mixed down to 2-channel audio and are played.

1 27)Playing. the source (vpage 21 –

2 Press D/ST to select “STEREO”. Stereo playback begins.

Direct playback

Sound recorded in source is played as is.

•Surround back signals or front height signals are not created.

•In this mode, the following items cannot be adjusted.

• Tone (vpage 51)

• MultEQ® (vpage 51)

•Dynamic EQ® (vpage 52) • Dynamic Volume™ (vpage 52)

•RESTORER (vpage 53)

1 27)Playing. the source (vpage 21 –

2 Press D/ST to select “DIRECT”. Direct playback begins.

Pure direct playback

This mode is for playback in higher sound quality than in “Direct playback” mode.

•The following circuits that affect sound quality are set to off.

•Main unit’s display circuit (The display is turned off.)

•Analog video input/output circuit

•Surround back signals or front height signals are not created.

•In this mode, the following items cannot be adjusted.

• Tone (vpage 51)

• MultEQ® (vpage 51)

•Dynamic EQ® (vpage 52) • Dynamic Volume™ (vpage 52)

•RESTORER (vpage 53)

1 27)Playing. the source (vpage 21 –

2 Press PURE.

The display goes dark, and pure direct playback begins.

•To cancel, press PURE again.

•Video signals are only output when HDMI signals are played in the PURE DIRECT mode.

NOTE

When in the PURE DIRECT mode, the menu screen is not displayed.

30