Denon AVR-1911 VOL, MUTE, MUTE, Switch, ENGLISH, “ZONE2”, Playback, ZONE2 SELECT, MASTER VOLUME, 1 you want to save, Adjusting the volume, nnSaving the settings

ENGLISH

PlaybackAdjusting the volume

Use VOL df to adjust the volume.

GAdjustable rangeH – – – –80dB – –40dB – 18dB

(When the “Volume Display” (vpage 59) setting is “Relative”)

GAdjustable rangeH 0 – 41 – 99

(When the “Volume Display” (vpage 59) setting is “Absolute”)

•At the time of purchase, “Volume Limit” (vpage 58) is set to “–10dB (71)”.

Turn MASTER VOLUME after pressing ZONE2 SELECT on the main unit to adjust the sound volume.

Turning off the sound temporarily

Press MUTE.

The sound is reduced to the level set at “Mute Level” (vpage 58) in the menu.

•To cancel, either adjust the volume or press MUTE again.

•The setting is canceled when the zone’s power is turned off.

Quick select function

It is also possible to save three settings for ZONE2.

nnSaving the settings

	Set the items below to the settings
1 you want to save.
	q Input source (vpage 39)
	w Volume (vpage 40)
2	Switch ZONE SELECT to
	“ZONE2”.
	The remote control unit switches to the
	operating mode for ZONE2.
3	Press and hold the desired QUICK SELECT button until
	“Memory” appears on the display.
	The current settings will be memorized.
		GQuick select defaultsH
		Input Source	Volume
QUICK SELECT 1		BD	–40dB
QUICK SELECT 2		SAT/CBL	–40dB
QUICK SELECT 3		DOCK	–40dB

nnRecalling the settings

1 Switch ZONE SELECT to “ZONE2”.

The remote control unit switches to the operating mode for ZONE2.

2 Press QUICK SELECT at which the settings you want to call out are saved.

Naming quick select settings

See “Quick Select Name” (vpage 59).

40