ENGLISH

HDMI Setup

Default settings are underlined.

Make settings for HDMI video/audio output.

 

 

 

Setting items

Setting details

 

Manual Setup

Audio Setup

Default settings are underlined.

Make settings for audio playback.

 

 

 

Setting items

Setting details

version Simple

Auto Lip Sync

ON : Compensated.

Make automatic

OFF : Not compensated.

compensation for timing

 

shift in audio and video

 

output.

 

HDMI Audio Out

Amp : Play back through speakers connected to the receiver.

Select HDMI audio output

TV : Play back through TV connected to the receiver.

device.

When the HDMI control function is activated, priority is given to the TV

 

audio setting (vpage 36 “HDMI control function”).

2ch DIRECT/STEREO Select the method for setting the speakers used in the 2-channel direct and stereo playback modes.

Setting : Select the method for setting the speakers used in the 2-channel direct and stereo playback modes.

•Basic : The settings at “Speaker Setup” (vpage 54) are applied.

•Custom : Make separate settings for 2-channel. Make the following settings:

Front : Set the front speaker size.

• Large : Use a large speaker that can adequately play back low

frequencies.

• Small : Use a small speaker that has inadequate playback capacity for

low frequencies.

version Basic

HDMI Control

You can link operations with devices connected to HDMI and compatible with HDMI Control.

ON : Use HDMI control function.

OFF : Do not use HDMI control function.

•When a device that is not compatible with the HDMI control function is connected, set “HDMI Control” to “OFF”.

•Please consult the operating instructions for each connected component to check the settings.

•Refer to “HDMI control function” (vpage 36) for more information about the HDMI control function.

If “Speaker Config.” – “Subwoofer” (vpage 54) is set to “No”, the setting is automatically set to “Large”.

Subwoofer : Set the presence of a subwoofer.

•Yes : Use a subwoofer.

•No : Select when a subwoofer is not connected.

If “Speaker Config.” – “Subwoofer” (vpage 54) is set to “No”, the setting is automatically set to “No”. If the “Front” setting is “Small”, the setting is automatically “Yes”.

Advanced

NOTE

• When “HDMI Control” is set to “ON”, it consumes more standby power. If you are not using this unit for an extended period, it is

 

recommended that you unplug the power cord from the power outlet.

 

• “HDMI Control” does not work when the power to the equipment is off.

 

Either turn power on or set to standby.

 

• The HDMI control function controls operations of a TV that is compatible

 

with the HDMI control function. Make sure that the TV and HDMI are

 

connected when you perform HDMI control.

 

• If the “HDMI Control” settings have been changed, always reset the

 

power to connected devices after the change.

Standby Source

Last : This item is set at the last-used input source.

Sets the HDMI input source

HDMI1 / HDMI2 / HDMI3 / HDMI4 : Put the respective input source into

to put into standby when

standby.

the power is on.

“Standby Source” can be set when “HDMI Control” is set to “ON”.

 

Power Off Control

All : If power to a connected TV is turned off independently of the input

Links the power standby

source, power to this unit is automatically set to standby.

of this unit to external

Video : If power to a connected TV is turned off when the input source

equipment.

is BD / DVD / TV / SAT/CBL / GAME / V.AUX / DOCK, power to this unit is

 

automatically set to standby.

 

OFF : This unit does not link with power to a TV.

“Power Off Control” can be set when “HDMI Control” is set to “ON”.

Subwoofer Mode : Select low range signals to be reproduced by subwoofer.

•LFE : When the “2ch DIRECT/STEREO” – “Front” setting is set to “Large”, the LFE signal alone is output from the subwoofer. Also, when the “2ch DIRECT/STEREO” – “Front” setting is set to “Small”, the front channel low range signal is added to the LFE signal output from the subwoofer.

•LFE+Main : The front channel low range signal is added to the LFE signal output from the subwoofer.

This setting can be set made “2ch DIRECT/STEREO” – “Subwoofer” is set to “Yes”.

Crossover : Set the maximum frequency of the bass signal output from each channel to the subwoofer.

•40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz

•This setting can be set made “2ch DIRECT/STEREO” – “Subwoofer” is set to “Yes”.

•If the “2ch DIRECT/STEREO” – “Front” setting is “Large” and the “Subwoofer Mode” setting is “LFE”, “Full Band” is displayed and the setting cannot be made.

version

Information

Remote control operation

Move the cursor

Confirm the setting

Return to previous menu

57

buttons

(Up/Down/Left/Right)