ENGLISH

Check of the measurement results

1

Select the items.

 

 

The measurement results of each item can be checked here.

 

 

A.Set SpConf.Ck

 

 

(Remote control unit)

 

 

2

Press the ENTER button and display the verification screen.

 

[Speaker Config. Check]

[Delay Time Check]

[Channel Level Check]

(Remote control unit)

NOTE:

•When measurements have been made using the measurement microphone, speakers with a built-in filter such as subwoofers might be set with a value that differs from the physical distance because of the internal electrical delay.

3

If the check ends, press the ENTER button again.

 

 

(Remote control unit)

 

 

4

Select from the following three items based on the measurement

results.

 

 

•

Store : Set with the checked measurement value.

 

•

Retry : Perform the measurement again.

 

•

Cancel : Cancel the checked measurement value.

 

(Remote control unit)

A.Set

<Store

 

 

5

When the “Store” is selected, all parameters are stored up and

switch to the SUBWOOFER MODE setting.

(Remote control unit)

24