ENGLISH

•After adjusting using the test tones, adjust the channel levels either according to the playback sources or to suit your tastes, as (described) below.

1

Select the speaker whose level you want

 

 

to adjust.

The channel switches as shown below each time the button is pressed.

FL C FR SR SBR SBL

SW SL

When the surround back speaker setting is set to “1sp” for “Speaker Configuration”, this is set to “SB”.

“SB” appears only when “POWER AMP ASSIGN” setting is SURR. BACK mode.

NOTE: Please make sure the “AUDIO” position of the slide switch on the remote control unit.

2

Adjust the level of the selected

2

2

speaker.

1

 

Default setting of channel level is 0 dB.

The level of the selected speaker can be adjusted within the range of +12 to –12 dB using the cursor buttons.

SW channel level can be turned off by decreasing one step from –12 dB.

OFF ´ –12 dB ´ +12 dB

49