[1] Adjusting the sound quality (tone)
The tone control function will not work in the direct mode.
1 | The tone switches as follows each time the TONE CONTROL | |
| ||
| button is pressed. |
|
| TONE |
|
| CONTROL |
|
| BASS | TREBLE |
2 | (Main unit) |
|
With the name of the volume to be | SELECT | |
adjusted selected, turn the SELECT knob to adjust the level.
(Main unit)
•To increase the bass or treble: Turn the control clockwise. (The bass or treble sound can be increased to up to +6 dB in steps of 1 dB.)
•To decrease the bass or treble: Turn the control counterclockwise. (The bass or treble sound can be decreased to up to
[2]Listening over headphones
1 | Plug the headphones’ plug into the jack. | PHONES |
Connect the headphones to the |
| |
| PHONES jack. |
|
| The |
|
| speaker output) is automatically |
|
| turned off when headphones are | 1 |
| connected. |
ENGLISH
2 3 1
3 | If you do not want the bass and treble to be adjusted, turn on | |
| ||
| the tone defeat mode. |
|
| TONE |
|
| DEFEAT | The signals do not pass through the |
|
| |
|
| bass and treble adjustment circuits, |
|
| so it provides higher quality sound. |
(Main unit)
NOTE:
To prevent hearing loss, do not raise the volume level excessively when using headphones.
[3] Turning the sound off temporarily (muting)
1 | Use this to turn off the audio output |
| |
| temporarily. |
| Press the MUTING button. |
Cancelling MUTING mode.
•Press the MUTING button again.
•Muting will also be cancelled when MASTER VOL is adjusted up or down.
[4]Combining the currently playing sound with the desired image
1
1
1 | Simulcast playback |
| |
| Use this switch to monitor a video source |
| other than the audio source. |
| Press the VIDEO SELECT button repeatedly |
| until the desired source appears on the |
| display. |
Cancelling simulcast playback.
VIDEO SELECT
(Main unit)
1
•Select “SOURCE” using the video select button.
•Switch the program source to the component connected to the video input jacks.
(Remote control unit)
Display
1
IN=V SOURCE43