ENGLISH

Setting the Auto Surround Mode

For the three kinds of input signals as shown below, the surround mode played the last is stored in the memory. At next time it the same signal inputs, the memorized surround mode is automatically selected and the signal is played.

Note that the surround mode setting is also stored separately for the different input function.

 

SIGNAL

Default Auto Surround Mode

 

 

 

q

Analog and PCM 2-channel signals

STEREO

 

 

 

w

2-channel signals of Dolby Digital, DTS or other multichannel format

Dolby PLIIx Cinema

 

 

 

e

Multichannel signals of Dolby Digital, DTS or other multichannel format

Dolby or DTS Surround

 

 

 

1

Select “ON” if you want to use the auto surround mode, “OFF” if

you do not want to use it.

 

31 AUTOSURR. ON

2

Press the ENTER or

(down) button to switch the Ext. In SW Level setting.

 

Setting the Ext. In SW Level

Set the playback level of the analog input signal connected to the Ext. In terminal.

1

Select desired setting.

• Select according to the specifications of the player being used.

Also refer to the player’s operating instructions.

• +15dB (default) recommended. (0, +5, 10 and +15 can be selected.)

32 EXT.IN SW+15

2

Press the ENTER or

(down) button to switch the Power Amp Assignment setting.

 

31