ENGLISH

• Operating the surround mode and surround parameters from the main unit‘s panel.

1

Turn the SELECT knob to select the surround mode.

SELECT

(Main unit)

1 2 1, 3

•When turned clockwise

DIRECT STEREO DOLBY PRO LOGIC IIx DTS NEO:6 5CH/7CH STEREO MONO MOVIE

VIRTUAL SURROUND MATRIX VIDEO GAME JAZZ CLUB ROCK ARENA

• When turned counterclockwise

DIRECT STEREO DOLBY PRO LOGIC IIx DTS NEO:6 5CH/7CH STEREO MONO MOVIE

VIRTUAL SURROUND MATRIX VIDEO GAME JAZZ CLUB ROCK ARENA

To select the surround mode while adjusting the surround parameters, tone defeat or tone control, press the SURROUND MODE button then operate the selector.

 

SURROUND ￿

 

MODE

 

(Main unit)

2

Press the SURROUND PARAMETER button.

Press and hold in the surround parameter button to select the parameter you want to set.

 

• The parameters which can be set differ for the different surround modes. (Refer to “Surround Modes and Parameters” on page 60.

 

SURROUND￿

 

PARAMETER

 

(Main unit)

3

Display the parameter you want to adjust, then turn the SELECT knob to set it.

NOTE:

•When making parameter settings, the display will return to the regular condition several seconds after the last button was pressed and the setting will be completed.

Surround parameters e

ROOM SIZE:

This sets the size of the sound field.

There are five settings: “small”, “med.s” (medium-small), “medium”, “med.l” (medium-large) and “large”. “small” recreates a small sound field, “large” a large sound field.

EFFECT LEVEL:

This sets the strength of the surround effect.

The level can be set in 15 steps from 1 to 15. Lower the level if the sound seems distorted.

DELAY TIME:

In the matrix mode only, the delay time can be set within the range of 0 to 110 ms.

59