Denon AVR-2105 ZONE2, SOURCE, Multi-sourceplayback

ENGLISH

Multi-source playback

[1] Outputting a program source to an amplifier, etc., in a different room (ZONE2 mode)

1	Press the ZONE2/REC SELECT button.
	The display switches as follows each
	time the button is pressed.

2, 4 1 2

ZONE

REC

(Main unit)

2	With “ZONE2 SOURCE” displayed, turn
	the FUNCTION knob and select the source
	you wish to record.

FUNCTION

(Main unit)

3	Start playing the source to be output.
	• For operating instructions, refer to the manuals of the
	respective components.
4	To cancel, turn the function knob and	FUNCTION
	select “SOURCE”.

(Main unit)

Display		2
	PHONO CD TUNER DVD /		VDP TV / DBS
	ZONE2 VCR -1 -2	V.AUX CDR	/ TAPE
ZONE2		SOURCE

NOTES:

•The signals of the source selected in the ZONE2 mode are also output from the VCR-1, VCR-2 and CDR/TAPE recording output terminals.

•Digital signals are not output to the ZONE2 output jacks.

[2] Remote control unit operations during multi-source playback (selecting the source)

1 Set the slide switch to “AUDIO” and “ZONE2”.

	(Remote control unit)
2	Press the ZONE2 “ON” button.
	To cancel the ZONE2 mode.
	Press the ZONE2 “OFF” button.
3	(Remote control unit)
	Press the input source button.
4	• The ZONE2 source switches directly.
	The output level of the ZONE 2 SPEAKER
	OUT terminals can be controlled using the
	VOLUME + and – buttons on the remote
	control unit.
	(Remote control unit)
	DEFAULT SETTING (ZONE2 VOLUME LEVEL) :
5	- - - dB (MINIMUM)
	When the ZONE2 SOURCE function is set
	to TUNER, the preset channel can be
	selected using the CHANNEL + and –
	buttons on the remote control unit.
	(This is only possible when the main unit
	in the ZONE2 mode.)
	(Remote control unit)

2

2

3

1

	OUTPUT
SURROUND￿		ZONE 2
BACK

(Light)

The main zone output can be turned on and off with the MAIN ON/OFF button.

5

1

4

47