Denon AVR-391 Speaker Config

ENGLISH

									Set up speakers	Simple
Speaker Config.
									Default settings are underlined.	version
Press MENU.				Use ui to select a speaker, and use o p to select a			S.B(Pre)	Set the presence, size and number of surround
1 The menu is displayed on the display of this unit.				4 detailed setting.			(Surround Back)	back speakers.
							• Large : Use a large speaker that can adequately play back low
				Items to be set are shown below.						Basic
							frequencies.
	Speaker	Setup		Front		Set the front speaker size.	• Small : Use a small speaker that has inadequate playback capacity
Use ui			then press	• Large : Use a large speaker that can adequately play back low			for low frequencies.			version
	to select “Speaker Setup”, and
2 ENTER.							• None : Select when the surround back speakers are not connected.
				frequencies.
				• Small : Use a small speaker that has inadequate playback capacity			Even when the “S.B(Pre)“ setting is other than “None”, sound
				for low frequencies.
							may not be emitted from the surround back speaker, depending
							on the playback source. In this case, make “Surround Parameter”
	Speaker	Config.		• When “SW” is set to “No”, “Front” is automatically set to “Large”.			– “SB CH OUT” (vpage 35) setting other than “OFF”.
				• When	“Front” is set to “Small”, “Center”, “Surround“ and		SW (Subwoofer) Set the presence of a subwoofer.
Use uito select “Speaker Config.”, and then press				“S.B(Pre)” can not be set to “Large”.
							• Yes : Use a subwoofer.
3 ENTER.				Center Set the presence and size of the center speaker.			• No : Select when a subwoofer is not connected.			Advanced
				• Large : Use a large speaker that can adequately play back low			When “Front” is set to “Small”, “SW” is automatically set to
	Front	:•Large–		frequencies.			“Yes”.
				• Small : Use a small speaker that has inadequate playback capacity
							5 Press ENTER to enter the setting.
NOTE				• None : Select when a center speaker is not connected.
				for low frequencies.						version
Do not use the outward shape of the speaker to determine selection				“Large” is not displayed when “Front” is set to “Small”.					Speaker Config.
of a “Large” or “Small” speaker. Instead, use the frequencies set in
				Surround Set the presence and size of the surround speakers.
“Crossover Frequency” (vpage 9) as the standard for determining
bass reproduction capability.				• Large : Use a large speaker that can adequately play back low
				frequencies.
				• Small : Use a small speaker that has inadequate playback capacity
				for low frequencies.
				• None : Select when the surround speakers are not connected.
				• When “Surround” is set to “Large”, “S.B(Pre)” can be set to
				“Large”.
				• When “Surround” is set to “None”, “S.B(Pre)” can automatically						Information
				set to “None”.

Remote control operation	Move the cursor	Confirm the setting	Return to previous menu	7
buttons	(Up/Down/Left/Right)