ENGLISH

Set up speakers

Bass Setting

1Use uito select “Bass Setting”, and then press ENTER.

Bass Setting

LFE •120Hz–

2Use o p to select the frequency.

LFE Set LFE signal playback range.

•80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz

Default settings are underlined.

3Use ui to select “Mode”, and use o p to select a detailed setting.

Mode :• LFE –

Mode Select low range signals to be reproduced by subwoofer.

•LFE : The low range signal of the channel set to “Small” speaker size is added to the LFE signal output from the subwoofer.

•LFE+Main : The low range signal of all channels is added to the LFE signal output from the subwoofer.

•“Mode” can be set when “Speaker Config.” – “SW” (vpage 7) is set to “Yes”.

•Play music or a movie source and select the mode offering the strongest bass.

•Select “LFE+Main” if you want the bass signals to always be produced from the subwoofer.

NOTE

If “Front” and “Center” for “Speaker Config.” are set to “Large”, and “Mode” is set to “LFE”, no sound may be output from the subwoofers, depending on the input signal or selected surround mode.

4Press ENTER to enter the setting.

Distance

1Use ui to select “Distance”, and then press ENTER.

Distance

Feet :• 1ft–

2Use opto change the step (minimum variable distance).

1ft : For changing in 1-foot steps.

0.1ft : For changing in 0.1-foot steps.

Default settings are underlined.

3Use ui to select a speaker, and use o p to select distance.

FL / FR / C / SW / SL / SR / SBLz/ SBRz

Select the speaker.

zWhen the “Speaker Config.” – “S.B(Pre)” (vpage 7) setting is set to “None”, “SBL” and “SBR” is not displayed.

•0.0ft – 60.0ft : Set the distance.

•The speakers that can be selected differ depending on the “Speaker Config.” (vpage 7) settings.

•Default settings :

FL / FR / C / SW : 12.0 ft

SL / SR / SBL / SBR : 10.0 ft

•Set the difference in the distance between the speakers to less than 20 ft.

NOTE

Speakers set to “None” in “Speaker Config.” (vpage 7) are not displayed.

4Press ENTER to enter the setting.

Distance

Bass Setting

8

Remote control operation

Move the cursor

Confirm the setting

Return to previous menu

 

buttons

(Up/Down/Left/Right)