Denon AVR-391 manual 38

ENGLISH

Setting items	Setting details
Mode	n In the PLgx or PLgmode
Set the play modes for the	Cinema : Surround sound mode optimized for movie sources.
different surround modes.	Music : Surround sound mode optimized for music sources.
	Game : Surround sound mode optimized for games.
	Pro Logic : Dolby Pro Logic playback mode (PLg mode only).
	n In the DTS NEO:6 mode
	Cinema : Surround sound mode optimized for movie sources.
	Music : Surround sound mode optimized for music sources.
	The “Music” mode is also effective for movie sources including a lot
	of stereo music.
LFE	–10dB – 0dB
Adjust the low-frequency	For proper playback of the different sources, we recommend setting
effects level (LFE).
	to the values below.
	• Dolby Digital sources : “0dB”
	• DTS movie sources : “0dB”
	• DTS music sources : “–10dB”
Center Image	0.0 – 1.0 (0.3)
Assign center channel
signal to front left and right
channels for wider sound.
Panorama	ON : Set.
Assign front L/R signal also	OFF : Do not set.
to surround channels for
wider sound.
Dimension	0 – 6 (3)
Shift sound image center
to front or rear to adjust
playback balance.
Center Width	0 – 7 (3)
Assign center channel
signal to front left and right
channels for wider sound.
AFDM	ON : Set.
(Auto flag detect mode)	OFF : Do not set.
Detect the source’s

surround back channel	[Example] Playing Dolby Digital software (with EX flag)
	• When “AFDM” is set to “ON”, the surround mode is automatically set
signal and set the
	to the DOLBY D + PLgx C mode.
optimum surround mode
	• To play in the DOLBY DIGITAL EX mode, set “AFDM” to “OFF” and
automatically.
	“Surround Parameter” – “SB CH OUT” to “MTRX ON”.
	Some Dolby Digital EX sources do not include EX flags. If the playback
	mode does not switch automatically even when “AFDM” is set to
	“ON”, set “Surround Parameter” – “SB CH OUT” to “MTRX ON” or
	“PLgx CINEMA”.

		Adjusting the sound field effects
Setting items		Setting details
D.Comp	Low / Mid / High : These set the compression level.
Compress dynamic range	OFF : Turn dynamic range compression off.
(difference between loud
and soft sounds).
DRC	Auto : Automatic dynamic range compression on/off control according to
Compress dynamic range	the source. This can be set in the Dolby TrueHD mode.
(difference between loud	Low / Mid / High : These set the compression level.
and soft sounds).	OFF : Dynamic range compression is always off.
SB CH OUT	n For 2-channel sources
Sets the method of	ON : The surround back channel is used.
generating of the surround	OFF : No signal is played from the surround back channels.
back channel.	n For Multi-channel sources
This can also be set by	Set the decoding method for the surround back channel.
pressing STANDARD on	DSCRT ON : Play the surround back signals included in the 7.1-channel
the main unit.	source.
	MTRX ON : Generate and play the surround back signals from the
	surround channel signals.
	ES MTRXz1 : Generate and play the surround back signals from the
	surround channel signals of the DTS source.
	ES DSCRTz2 : Play the surround back signals included in the
	6.1-channel DTS source.
NOTE	PLgx CINEMAz3 : Generate and play the surround back signals by
If the setting in “Speaker	decoding the signals in the Dolby Pro Logic gx Cinema mode.
Config.” – “S.B(Pre)”	PLgx MUSIC : Generate and play the surround back signals by
(vpage 7) is “None”, “SB	decoding the signals in the Dolby Pro Logic gx Music mode.
CH OUT” is not displayed.	OFF : Do not play the surround back channel.
	z1	This can be selected when playing DTS sources.
	z2	This can be selected when playing DTS sources including a signal to
		identify discrete 6.1-channel signals.
	z3 This can be selected when “Speaker Config.” – “S.B(Pre)” (vpage 7)
		is set to other than “None”.
		If the source being played contains a surround back signal, the decoder
		type is automatically selected by the AFDM function. Set “AFDM” to
		“OFF” to switch to your preferred decoder.
Subwoofer	ON : The subwoofer is used.
Turn subwoofer output on	OFF : The subwoofer is not used.
and off.	NOTE
	This can be set when the surround mode is “DIRECT” (vpage 44, 45), and
	the “Mode” (vpage 8) is “LFE+Main”.
Default	Yes : Reset to the defaults.
The “Surround Parameter”	No : Do not reset to the defaults.
settings are returned to the
default settings.

version Simple

version Basic

version Advanced

Information

Remote control operation	Move the cursor	Confirm the setting	Return to previous menu	35
buttons	(Up/Down/Left/Right)