Denon AVR-391 Channel Level

ENGLISH

Set up speakers

Simple

Channel Level

Crossover Freq.

Default settings are underlined.

Default settings are underlined.

version

Use ui to select “Channel Level”,

The “Channel Level” settings are

Use uito select “Crossover Freq.”,

Default

1 and then press ENTER.

returned to the default settings.

1 and then press ENTER.

• “Crossover Freq.” can be set when the “Bass

• Yes : Reset to the defaults.

Setting” – “Mode” (vpage 8) setting

is

Basic

• No : Do not reset to the defaults.

“LFE+Main”, or when you have a speaker that

Channel Level

4

Press ENTER to enter the setting.

Crossover

Freq.

is set to “Small”.

version

• Always set the crossover frequency to “80Hz”.

When using small speakers, however, we

Test Tone Start

recommend setting the crossover frequency to

a higher frequency.

• For speakers set to “Small”, sound below the

Test

Tone

Start

5

Press RETURN.

Front

:•

80Hz–

crossover frequency is cut from the sound

output. The cut bass sound is output from the

Press ENTER.

Use ui to select a speaker, and use

subwoofer or front speakers.

2 Output test tone.

Channel Level

2 o p to select the frequency.

• The “Mode” setting (vpage 8) determines

Use ui to select a speaker, and use

which speakers can be set.

Front / Center / Surround / S.Back

• When “LFE” is selected, speakers set to

3 o p to adjust the sound volume of

This is operable when the surround mode is

• 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz

displayed and the setting cannot be made.

Advanced

n Outputting a test tone directly with remote

Specify crossover

frequency for each

“Small” at “Speaker Config.” can be set. If

each speaker to be equal.

control operation

speaker.

the speakers are set to “Large”, “– Full –” is

Dolby Pro Logic g, Dolby Pro Logic gx, or DTS

• If set to “LFE+Main”, this setting can be made

z

/ SBL

z

/ SL / SW

/ 120Hz / 150Hz / 200Hz / 250Hz : Set the

FL / C / FR / SR / SBR

NEO:6.

regardless of the speaker size.

version

z When the “Speaker Config.” – “S.B(Pre)”

crossover frequency.

Select the speaker.

(vpage 7)

setting

is set to “None”,

q Press TEST.

3

Press ENTER to enter the setting.

The test tone is output from the “L” channel

“SBL” and “SBR” is not displayed.

of the front speakers.

• –12.0dB – +12.0dB (0.0dB) : Adjust the volume.

w Use opto adjust the sound volume of each

Crossover Freq.

speaker to be equal.

• When ois pressed while the subwoofer volume

e Use u i to select the next speaker for

Press MENU.

outputting the test tone.

is set to “–12 dB”, the “SW” setting switches

r Once adjustment is completed, press TEST

4 The menu returns to normal display.

to “OFF”.

• When “Channel Level” is adjusted, the adjusted

again.

values are set for all the surround modes. To

adjust the channel level separately for the

different surround modes, use the operation

see page 27.

Information

NOTE

• Speakers set to

“None” in the “Speaker

Config.” (vpage 7) settings are not displayed.

• When a headphones jack is inserted in the

PHONES jack of this unit, the “Channel Level”

is not displayed.

9

Remote control operation

Move the cursor

Confirm the setting

Return to previous menu

buttons

(Up/Down/Left/Right)