ENGLISH

Playback (Advanced operation)

Simple

Playback (Basic operation) (vpage 17)

Selecting a listening mode (Surround mode) (vpage 21)

nAdjusting the volume of the speakers (vpage 27) n Sleep timer function (vpage 28)

n Quick select function (vpage 28)

n Various memory functions (vpage 28)

Convenient functions

Adjusting the volume of the speakers

You can adjust the channel level either according to the playback sources or to your taste, as described below.

nAdjusting the volume of the different speakers

1 Press CH LEVEL.

FL :• 0.0dB –

2 Use ui to select the speaker.

The speaker that can be set switches each time one of the buttons is pressed.

3Use o p to adjust the volume.

•In the case of a subwoofer, pressing o when it is at “–12 dB” will change the setting to “OFF”.

•If no button is operated for about 5 seconds, the display is returned to the normal display.

After registering, the display is returned to the normal display.

•When a headphone jack is inserted, the headphone channel level can be adjusted.

nAdjusting the volume of group of speakers (Fader function)

This function lets you adjust (fade) the sound all at once from the front (front speaker / center speaker) or rear (surround speaker / surround back speaker).

1 Press CH LEVEL.

FL :• 0.0dB –

2 Press u.

Front•:–Rear

3Use o p to adjust the volume of the speakers.(o : front, p: rear)

•If no button is operated for about 5 seconds, the display is returned to the normal display.

After registering, the display is returned to the normal display.

•The fader function does not affect the subwoofer.

•The fader can be adjusted until the volume of the speaker is adjusted to the lowest value of –12 dB.

version

version Basic

version Advanced

Information

27