ENGLISH
Tuning in radio stations
Listening to FM/AM broadcasts
1 Press TUNER to switch the input source to “TUNER”.
2 Press BAND to select “FM” or “AM”.
FM When listening to an FM broadcast.
AM When listening to an AM broadcast.
3 Tune in the desired broadcast station.
q To tune in automatically (Auto tuning)
Press MODE to light the “AUTO” indicator on the display, then use TUNING d or TUNING f to select the station you want to hear.
w To tune in manually (Manual tuning)
Press MODE to turn off the display’s “AUTO” indicator, then use TUNING d or TUNING f to select the station you want to hear.
•If the desired station cannot be tuned in with auto tuning, tune it in manually.
•When tuning in stations manually, press and hold TUNING d or TUNING fto change frequencies continuously.
nPresetting radio stations (Manual preset)
Your favorite broadcast stations can be preset so that you can tune them in easily. Up to 56 stations can be preset.
•Stations can be preset automatically at “Auto Preset” (vpage 32). If “Auto Preset” is performed after performing “Manual Preset”, the “Manual Preset” settings will be overwritten.
1 Tune in the broadcast station you
want to preset.
2 Press MEMORY.
3 Press SHIFT to select the block (A to G) in which the channel (1 to 8 per a block) is to be preset, then press CHANNEL + or CHANNEL
–to select the preset number.
4Press MEMORY again to complete the setting.
• To preset other stations, repeat steps 1 to 4.
Default settings
Block (A – G) |
| ||
and | Default Settings | ||
Channel (1 – 8) |
| ||
A1 | – A8 | 87.5 / 89.1 / 98.1 / 107.9 / 90.1 / 90.1 / 90.1 / | |
90.1 MHz | |||
|
| ||
B1 | – B8 | 520 / 600 / 1000 / 1400 / 1500 / 1710 kHz, | |
90.1 / 90.1 MHz | |||
|
| ||
C1 | – C8 | 90.1 MHz | |
D1 | – D8 | 90.1 MHz | |
E1 | – E8 | 90.1 MHz | |
F1 | – F8 | 90.1 MHz | |
G1 | – G8 | 90.1 MHz | |
nListening to preset stations
1Press SHIFT to select the memory block (A to G).
2Press CHANNEL + or CHANNEL – to select the desired preset channel.
nTuner (FM/AM) operation
Operation buttons | Function |
CHANNEL +, – | Preset channel selection |
MENU | Amp menu |
uiop | Cursor operation |
ENTER | Enter |
RETURN | Return |
BAND | FM/AM switching |
MODE | Switch search modes |
TUNING df | Tuning (up/down) |
SHIFT | Preset channel block selection |
MEMORY | Preset memory registration |
20