ENGLISH
<JOG DIAL>,
ENTER
Setup
ENTER [D H]
[D H]
ENTER
[NUMBER] (1~9, 0/10, +10)About the button names in this explanation
<> : Buttons on the main unit
[ | ] : Buttons on the remote control unit |
Button name only :
Buttons on the main unit and remote control unit
Recording monitor auto playback setting (Store Monitor)
• Upon purchase this is set to “On”.
1 From the “Store Setting” mode, select “Store Monitor” then press ENTER.
2 Use <JOG DIAL> or [D H] to select.
On:The sound being recorded is automatically monitored (played).
Off:The sound being recorded is not automatically monitored (played).
3 Press ENTER.
Making the network settings (Network Setting)
The following settings can be made:
£IP address setting (IP Address)
£Proxy setting (Proxy)
£Internet radio setting (Internet Radio)
Making the IP address settings (IP Address)
¢Automatic setting of the IP address
When the router’s DHCP server function is enabled (setting for automatically assigning IP addresses), the
16
¢Manual setting of the IP address
If the router does not have a DHCP server function or it is disabled and a fixed IP address must be set, make the setting described below.
For the IP address and other information, contact your ISP (Internet service provider).
1 From the “Network Setting” mode, select “IP Address” then press ENTER.
2 Select “DHCP” then press ENTER.
3 Select “Off” then press ENTER.
• The manual setting mode is set.
4 Use <JOG DIAL> or [D H] to select the next setting item, then press ENTER.
•IP Address
•Subnet Mask
•Gateway
•Primary DNS
•Secondary DNS
5 Use [NUMBER] (1 ~ 9, 0/10) to input all the places, then press ENTER.
6 Repeat steps 4 and 5 to set all the items.
ENGLISH