ENGLISH
PC applications
PC applications
Denon Music Manager function
Denon Music Manager can be used for the operations described below.
£Displaying lists of and editing the tracks on the HDD
£Editing playlists
£Importing music files from a computer
£Backing up the tracks on the HDD onto a computer
£Restoring backed up data onto the
We recommend backing up the data recorded on the
Required recommended equipment and environment for using Denon Music Manager
•Computer on which Windows XP Service Pack 2 is installed
•HDD with sufficient free space
•USB 2.0 connection terminal
NOTE:
•When connecting a computer and the
Using any software other than Denon Music Manager could destroy the data on the HDD or damage the
Installing Denon Music Manager
1 Load the included CD-ROM (Denon Music Manager) onto the computer.
• The installation wizard screen appears.
If the installation menu screen does not appear, open the CD- ROM drive in “My Computer” and launch “SETUP.EXE”.
2 Follow“Next”. the instructions on the screen and click Check the settings for installation, then finally click “Install”.
•Installation is executed. A dialog box appears to indicate that installation is finished.
3 Click “Finish”.
• This completes installation.
Connecting to a computer
1 Turn on the power of the computer on which Denon Music Manager is installed.
Leave the
2 Once the computer has started up, connect it to the PC CONTROL (USB) terminal on the
3 Turn on the CHR-F103’s power.
4 Select “PC Connect Mode” from “Others” on the setup menu, then press ENTER.
5 Select “OK”, then press ENTER.
• “PC Connect Mode” is displayed.
6
7 Follow the instructions in the operating instructions included on the Denon Music Manager’s
8 Once all operations are completed, turn off the CHR- F103’s power.
After the power turns off, disconnect the USB cable.
NOTE:
•NEVER disconnect the USB cable or turn off the power of the computer or the
34
ENGLISH