CD synchronized recording

Function : CD

 

Edit function

Function : CD

This function lets you easily record the tracks from a CD onto a

 

This function lets you record onto cassette tapes with automatic

cassette tape.

 

 

editing according to the length of the tape.

 

For instructions, see the cassette deck’s operating instructions.

 

Load the CD and cassette tape before starting.

ENGLISH

¢Canceling the editing function:

Press 2 or <TAPE 2>.

NOTE:

Timer playback function

The receiver’s timer function can be used to conduct playback at set times.

For operating instructions, refer to the manual included with the receiver.

•Switch the CHR-F103’s function to the function you want to play before setting the timer standby mode.

1 Turn on the power of the various components.

2 Press [MENU] three times in a row.

• “EDIT” is displayed on the receiver’s display.

3 Use [9] to set the length of the cassette tape.

Example: To record onto a 60-minute cassette tape, use [9] to select “C-60”.

C – 46

 

C – 60

 

C – 90

 

C –

 

 

 

Editing canceled

(The length of the cassette tape is the total length for sides A and B.)

•When the cassette tape length is set, the numbers of the tracks and the total playing time for sides A and B respectively are displayed.

 

 

 

 

 

 

 

 

 

Tape Edit

C – 46

 

 

 

 

Edit

01–06

A 20:26

 

 

 

 

Edit

07–09

B 11:23

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4 Press <1/3> or [CD 1/3].

• Recording of the CD starts.

•The editing function does not work with discs containing 26 tracks or more.

•When using the edited recording function, be sure to load the cassette tape with side A facing upwards. The beginning of the cassette tape is found automatically before recording starts.

•When using a tape that is already recorded on, erase the tape before conducting edited recording.

•When using the edited recording function, set the cassette deck’s reverse mode to “ ”.

•In some cases it may not be possible to record all the tracks on the cassette tape even if its length is longer than the total length of the tracks on the disc, due to the fact that the tracks must be divided between sides A and B. “OVER” is displayed on the CHR-F103’s display if there are tracks that cannot be recorded. If “OVER” is displayed, change the length of the cassette tape as described in step 3.

•When the editing function is in use, no buttons other than ON/STANDBY, [MENU], [9], [CD 1/3], 2, <TAPE 2> and [TIME/DISPLAY] will operate.

•Edited recording is not possible with discs containing files in MP3 or WMA format.

¢Setting a specific cassette tape length:

When “C –” is displayed, use [NUMBER] (1 ~ 9, 0/10, +10) to input the time.

Example: To set to 54 minutes

[+10] [+10] [+10] [+10] [+10] [4]

The length can be set to up to 150 minutes.

Operations System

33

ENGLISH