Denon CHR-F103 Troubleshooting, ¢ System, ¢ HDD, ¢ NET, Page, Page, Page, Page, Cause, Cause, Cause, Cause, Symptom, Symptom, Symptom, Symptom, ENGLISH, Measures, Measures

ENGLISH

Troubleshooting

If a problem should arise, first check the following.1.Are all connections proper ?2.Have you operated the player according to the Operating Instructions ?

If this unit is not operating properly, check the items listed in the table below. Should the problem persist, there may be a malfunction. Disconnect the power immediately and contact your store of purchase.

¢ System

Symptom	Cause	Measures	Page
Display does not light and	• Power supply cord is not plugged into	• Plug the power supply cord into the	11
no sound is produced	power outlet.	power outlet.
when power is turned on.

No sound is produced or	• Incomplete connections with the	• Check the connections.	11
sound is distorted.	various devices.
	• The receiver’s function setting or	• Check the receiver’s function and	—
	adjustments are not right.	controls and adjust as necessary.

Display is dim.	• Dimmer function is on.	• Turn the dimmer function off by	15
		pressing the DIMMER button on the
		remote control unit.

¢ HDD

Symptom	Cause	Measures	Page
Selected tracks are not	• Copyright protected tracks cannot be		19
recorded.	recorded.
	• MP3 and WMA files cannot be	• Copy from the computer onto the	19
	recorded.	internal HDD using Denon Music
		Manager.

Recorded tracks are not	• Track registration information may	• If the track registration information is	—
displayed.	not be displayed properly if recording	not normal, press the ON/STANDBY
	was not completely normally, if the	button while pressing the 2 button
	AC power cord was unplugged during	and the CD/HDD/USB/NET button
	recording, etc.	simultaneously with the CHR-F103 in
		the standby mode. “Rebuild Index
		Mode” is displayed.
		Select “Yes” then press the ENTER
		button to rebuild the information
		registered on the HDD.

CD recording takes a lot	• Recording can take a long time if the	• Wipe the dirt off the disc or replace	4
of time.	CD is scratched or dirty.	the disc.

¢ CD

Symptom	Cause	Measures		Page
“No Disc” is shown on	• The disc is not properly loaded.	• Reload the disc.		4
the display even though
a CD is loaded.

Disc is not played when	• The disc is dirty or scratched.	• Wipe the dirt off the disc or replace		4
1/3 button is pressed.		the disc.

A specific part of a disc	• The disc is dirty or scratched.	• Wipe the dirt off the disc or replace		4
is not played.		the disc.

A CD-R or CD-RW disc	• The disc has not been finalized.	• Finalize the disc then play it.		4
cannot be played.	• The recording conditions are bad or	• Use a properly recorded disc.		—
	the quality of the disc itself it poor.

MP3 and WMA files	• The file formats, extensions or settings	• Create discs	with file formats,	24
cannot be played.	made when disc was created are not	extensions or	settings compatible
	compatible with the CHR-F103.	with the CHR-F103.

CD disc information is	• You are not connected to the network.	• Connect to the network.		12
not displayed.	• The CD information is not included in			12
	the Gracenote database on the HDD.

¢ NET

Symptom	Cause	Measures	Page
You are not connected to	• The LAN cable is disconnected.	• Connect properly with a LAN cable.	12
the network.	• (Server and CHR-F103) connected by	• Connect properly with a LAN cable.	13
	cross cable.
	• Router’s or hub’s power is off.	• Turn on the power of the router or	13
		hub.
	• Network settings are wrong.	• Check the router’s or hub’s operating	—
		instructions.
		• Contact your line administrator or	—
		provider.

Sound is broken.	• The sound may be broken depending	• If the playback bit rate is high or the	13
	on the network environment.	server traffic is heavy, stop the other
		applications running on the server.

No sound is produced.	• Playback data is in a format with which		28
	the CHR-F103 is not compatible.

Others

ENGLISH