
ENGLIS
9 OPERATING THE SURROUND FUNCTIONSAchieving the optimum surround sound
•Surround sound can be achieved using the settings made upon shipment from the factory (the default settings), but to achieve even more optimum surround sound, we recommend using the test tones to adjust the levels of the different channels, set the speaker distances (delay time), etc.
For details, make the settings referring to page 39.
(1) Playing DVDs in the surround mode | 1 |
• Refer to pages 14 and check that all the connections are correct.
• Operate the remote control unit at the “AMP” position.
2 |
|
|
| 5 |
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
13
1Turn on the power.
•The display lights.
•The mute mode is set for several seconds after the power is turned on to prevent noise from being produced.
Green
|
| Main unit | Remote control unit |
|
|
| |
| 2 | Select the DVD input source. |
|
Main unitRemote control unit
3 | Set the surround mode to “AUTO DECODE”. |
| |
| The display becomes as shown below. |
Main unit | Remote control unit |
AUTO DECO DE
AUTO ST D VD
If no signal is being input
| 2, 5 |
| 3 |
| 5 |
4 | Play the DVD. The display changes as shown below, |
| |
| depending on the type of disc. |
Example: When playing a ) disc.
DIGITAL DVD
• Playback in the Dolby Digital Surround mode.
Example: When playing a ) disc
DTS DVD
• Playback in the DTS Surround mode.
Example: When playing a ) disc
AUTO ST DVD
• Auto stereo – stereo playback.
5 | Adjust the volume. |
|
|
| |
| • When the input mode is set to “AUTO” and the surround | |
| mode is set to “AUTO DECODE”, depending on the signals | |
| of the disc being played, Dolby Digital, DTS or PCM is | |
| selected and the signals are automatically decoded and | |
| played in the Dolby Digital, DTS or auto stereo mode. | |
| • For details on the surround modes and the surround | |
| parameters, see “⁄0SURROUND PLAYBACK ” (pages 33 | |
| to 39). | + |
|
| |
|
| - |
| Main unit | Remote control unit |
| The volume is indicated on the main volume level | |
| display. |
|
29