ENGLISH

(8) TP search

Use this function to find RDS stations broadcasting traffic program (TP stations).

1

Set the band to “FM”.

Remote control unit

2

Press the RDS button until “TP”

 

 

appears on the display.

Remote control unit

3

Press the TUNING + (UP) or – (DOWN)

 

 

button TP search begins.

Remote control unit

4

The station name is displayed on the display after searching

 

 

stops.

•If no TP station is found when all the frequencies are searched, “NO PROGRAMME” is displayed.

(9) RT (Radio Text)

“RT” appears on the display when radio text data is received.

1

To turn the RT mode on, press the RT

 

 

button on the remote control unit until

 

the RT indicator is lit.

2

Remote control unit

When the station currently tuned in is offering a radio text

 

 

message service, the message scrolls on the display.

•When the RT mode is turned on while an RDS radio station not offering an RT service is tuned in, “NO TEXT” is displayed on the display, then the mode automatically switches to the PS mode.

•In the same way, the mode automatically switches to the PS mode when the RT service is finished. In this case, the mode automatically switches from the PS mode back to the RT mode when an RT broadcast is resumed.

•The RT mode cannot be set in the AM band or for FM stations not offering RDS broadcasts.

•To turn the RT mode off, press the RT button and switch to the desired display mode. (Refer to page 18.)

46