
ENGLISH
(3)After starting playback[1]Adjusting the sound quality (SDB/P.EQ)
The SDB/P.EQ function will not work in the direct mode.
1
1
1 | Press the SDB/P.EQ button. |
| |
| • The tone switches as follows each time the SDB/P.EQ |
| button is pressed. |
Main unit |
|
|
|
| Remote control unit | |||
SDB ON |
|
| (DRC ON ) |
| P.EQ1 | |||
|
|
| ||||||
DEFEAT |
|
|
| P.EQ3 |
|
| P.EQ2 | |
|
|
|
|
DEFEAT
•The signals do not pass through the SDB, DRC and P.EQ1~3 adjustment circuits, providing higher quality sound.
SDB ON
• SDB (Super Dynamic Bass) is turned on.
DRC ON
•DRC (Dynamic Range Compression) is turned on.
•This parameter adjusts the dynamic range of the Dolby Digital or DTS sound. When listening with the volume turned relatively low, at night for example, set this to the “ON” to lower the peak of the sound and amplify the quieter sounds, narrowing the dynamic range and making the sound easier to listen to.
•With DTS source, only displayed for sources compatible with dynamic range compression.
P.EQ1~3
•Preset Equalizer is turned on
•Three types of bass/treble balances and surround channel
delay settings are preset. Select them as desired.
If no operation is performed within 4 seconds, the display switches back to what was previously displayed.
[2] Adjustment the Sound Enhancer
The SOUND ENHANCER function will not work in the direct mode.
1
1 | Press the SOUND ENHANCER button. | |
| ||
| • The tone switches as follows each | |
| time the SOUND ENHANCER button is | |
| pressed. |
|
|
| Remote control unit |
| ENHANCER OFF | VOCAL ENH |
| SURR.ENH |
|
| ENHANCER OFF |
|
• The SOUND ENHANCER setting is turned off.
VOCAL ENH
•The VOCAL ENHANCER is turned on.
•The center channel is emphasized and DRC is turned on.
•When listening quietly at night, the vocals are easier to hear.
SURR.ENH
•The SURROUND ENHANCER is turned on.
•The surround channel is emphasized for a stronger sense of presence.
When SURROUND ENHANCER is turned on, SDB/P.EQ is defeated. When SDB/P.EQ is turned on, SURROUND ENHANCER is set to “ENHANCER OFF”.
[3] Turning the sound off temporarily (MUTING)
1
1 | Use this to turn off the audio output temporarily. |
| |
| Press the MUTING button. |
| Cancelling MUTING mode. |
| Press the MUTING button again. |
Remote control unit
NOTES:
•The mute mode is cancelled when the main unit’s main volume control or one of the main volume control buttons on the remote control unit is operated.
•The setting is cancelled if the set’s power is turned off.
32