Use this function to automatically tune to FM stations that provide RDS service. |
| ||
1 | Set the band to “FM”. | Set the remote |
|
|
| control selector | 2 |
|
| switches | |
|
|
| |
| Remote control unit | Switch1 to DVD |
| Switch2 to TUNER | |
2 |
| |
Press the RDS button until “RDS” |
| |
appears on the display. |
| |
|
| |
| Remote control unit |
|
3 | Press the TUNING + (UP) or – (DOWN) |
|
button to automatically begin the RDS |
| |
search operation. |
| |
|
|
Remote control unit
4 | When a broadcast station is found, that station’s name |
| |
| appears on the display. |
•If no RDS station is found when all the frequencies are searched, “NO PROGRAMME” is displayed.
(7)PTY searchENGLIS
1
3
Use this function to find RDS stations broadcasting a designated program type (PTY). For a description of each program type, refer to “Program Type (PTY)”.
1 | Set the band to “FM”. |
Remote control unit
2 | Press the RDS button until “PTY” |
| |
| appears on the display. |
Remote control unit
3 | Watching the display, press the PTY |
| |
| button to call out the desired program |
| type. |
4 | Press the TUNING + (UP) or – (DOWN) |
| |
| button to automatically begin the PTY |
| search operation. |
Remote control unit
5 | The station name is displayed on the display after searching |
| |
| stops. |
•If no station broadcasting the designated program type is found when all the frequencies are searched, “NO PROGRAMME” is displayed.
Remote control unit
45