ENGLIS

10SURROUND PLAYBACK(1)Before playing with the surround function

•Adjustments using the test tones can only be performed in the “Auto” mode and are only valid for the AUTO DECODE Surround modes. The adjusted levels are automatically stored in the memory.

•Even after adjusting using the test tones, the various channels can be adjusted using the procedure described below to suit the program source and your preferences.

1, 4

2

3 3

1

Press the TEST TONE button.

Remote control unit

2

Test tones are output from the different speakers.

 

 

Either turn the MASTER VOLUME dial on the main unit or

 

use the VOLUME buttons on the remote control unit to

 

adjust the volume.

 

+

 

-

Main unit

Remote control unit

3

Use the channel volume adjust buttons to adjust so that the

 

volume of the test tones is the same for all the speakers.

•The ( and ) cursor buttons on the remote control unit during the adjustments using the test tones.

Remote control unit

4

After adjusting using the test tones, adjust the channel levels

 

 

either according to the playback sources or to suit your tastes,

 

as described below.

Remote control unit

2, 4 4 1, 3

1

Press the CH.SELECT button on the remote control unit.

 

 

• The following is displayed:

 

LEVEL</>D ELAY

 

 

Remote control unit

2

Use the select

button while the above is displayed to

select “LEVEL”.

 

• The level display shown below appears.

FL VOL< 0 dB>

Remote control unit

3

Select the speaker whose level you want to adjust.

 

 

• The channel switches as shown below each time the button

 

is pressed.

 

 

 

 

 

 

END

 

FRONT L

 

CENTER

 

FRONT R

 

 

 

 

SUBWOOFER SURROUND L SURROUND R

Remote control unit

4

Adjust the volume level of the selected speaker while the

 

 

channel level is displayed.

Remote control unit

Once the channel level setting is completed, select “END” at step 3. The display returns to normal after several seconds.

33