ENGLISH
(2) Input mode setting1 |
|
|
|
| 5 | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3
1 | Press the FUNCTION button to select the input function to be |
| |
| played. |
Main unit | Remote control unit |
•The function switches as shown below.
•The function only changes in the “Æ” direction when operated from the remote control unit.
•Factory default (TAPE) = TAPE
DVD TUNER 
(TAPE) TV/AUX1 
AUX2
2 | When DVD, TV/AUX1, AUX2 was selected as the input |
| |
| function, press the remote control unit’s INPUT MODE button |
| to select the input mode. |
| • Consider “AUTO” as standard position. |
Remote control unit
AUTO 
PCM 
DTS 
ANALOG
1
2
3
5
Input mode selection function
•The input mode can be selected when the input function is set to DVD, TV/AUX1, AUX2.
•Different input modes can be selected for each input function. The selected input mode is stored in the memory for the individual input functions.
•When the input function is set to something other than the above, “ANALOG ONLY” is displayed and the input mode cannot be selected.
qAUTO (auto mode)
In this mode, the type of signal being input to the digital and analog input terminals is detected and the program in the set’s surround decoder is switched automatically to play the signals for the selected input function.
The presence or absence of digital signals is detected, the signals input to the digital input are identified and decoding and playback are performed automatically in DTS, Dolby Digital or PCM (2 channel stereo) format.
If no digital signal DVD is being input, the analog input
jacks are selected.
Use this mode to play Dolby Digital signals.
wPCM (exclusive PCM signal playback mode)
Decoding and playback are only performed when PCM signals are being input.
eDTS (exclusive DTS signal playback mode)
Decoding and playback are only performed when DTS signals are being input.
rANALOG (exclusive analog audio signal playback mode) The signals input to the analog input jacks are played. (This cannot be selected in the TV/AUX1, AUX2 mode.)
• “ANALOG” cannot be selected when TV/AUX1 or AUX2 |
|
| The input mode automatically switches to “AUTO” if you | |
was selected as the input function. |
|
| switch the input function to DVD from anything other than | |
• “ANALOG” can be selected when “TAPE” is set to |
|
| DVD. | |
“TV/AUX1” at “FUNCTION SETUP” under “QUICK |
|
|
| |
3 | Press the SURROUND button to select the surround mode. | |||
SETUP” in the detailed settings. | ||||
|
| |||
Main unit | Remote control unit |
• The function switches as shown below.
AUTO DECODE 
5CH STEREO 
HALL 
DOLBY VS
STEREO 
DIRECT 
AUTO DECODE
30