ENGLIS

[2] 2-channel mode settings

•In the AUTO DECODE mode, it is possible to automatically conduct multi-channel playback in the Dolby Digital or DTS surround mode or play in the stereo 2-channel mode (AUTO STEREO mode: factory default setting). For 2-channel input signals, one of four play modes can be set with the 2-channel mode setting (Auto Stereo, Dolby Pro Logic II Cinema, Dolby Pro Logic II Music and Dolby Pro Logic II Game).

For analog and PCM sources, it is also possible to select DTS NEO:6 Cinema and DTS NEO:6 Music.

When the function is set to TAPE or TUNER, the “Auto Stereo” 2-channel mode cannot be selected. To play in stereo, set the surround mode to “STEREO” (page 29).

1

3

2

• Operate the remote control unit at the “AMP” position.

Set the remote

1

control selector switches Switch1 to DVD Switch2 to AMP

3 3

2

1

Set the surround mode to “AUTO DECODE”.

 

 

•“AUTO DECODE” is displayed, then the normal display

 

reappears.

3

Select the desired 2-channel decode mode using the ( and

) SELECT buttons.

•The mode switches as follows each time one of the buttons is pressed:

Main unit

Remote control unit

AUTO ST PLC PLM

DTS Neo:6MDTS Neo:6CPLG

DTS NEO:6C and DTS NEO:6M can be selected for analog and PCM sources.

The Auto Stereo mode can be selected when the function is set to DVD, TV/AUX1 or AUX2.

Once the surround parameters have been set, stop operating buttons. After several seconds the display returns to normal and the settings are automatically validated.

NOTES:

•The 2-channel decode mode cannot be set when Dolby Digital 5.1-channel signals or DTS signals are being input.

 

 

or

 

Main unit

Remote control unit

 

If the mode is set to anything other than AUTO DECODE,

 

the AUTO DECODE mode can be set using the AUTO

 

DECODE button on the remote control unit.

2

Press the SURROUND PARAMETER button on the remote

control unit and select the 2-channel decode mode.

<AUTO S T >

Main unit

Remote control unit

This can be selected when the digital input consists of no signal, PCM signals, Dolby Digital 2-channel signals, as well as when the analog input is selected.

35