ENGLI

16LAST FUNCTION MEMORY

•This unit is equipped with a last function memory which stores the input and output setting conditions as they were immediately before the power is switched off.

This function eliminates the need to perform complicated resettings when the power is switched on.

•The unit is also equipped with a back-up memory. This function provides memory storage when the power switch is off and with the power cord disconnected.

17INITIALIZATION OF THE MICROPROCESSOR

When the indication of the display is not normal or when the operation of the unit does not shows the reasonable result, the initialization of the microprocessor is required by the following procedure.

1

Press the power button to set the

 

standby mode, then unplug the set’s

Red

power cord from the wall power outlet.

 

 

2

After at least 10 seconds, press the SURROUND MODE

button on the AVR-M330, press the SDB/P.EQ equalizer

button, then press the surround mode button again for at

 

 

 

 

least 2 seconds.

 

 

 

3

After several seconds, “INITIALIZE” appears on the display

 

 

 

 

and the power turns on.

 

 

• The microprocessor is initialized.

 

 

 

1

2

2

NOTES:

•If step 3 does not work, start over from step 1.

•If the microprocessor is reset, all the buttons and the setup settings are reset to the factory default values.

55