ENGLIS

14USING THE SLEEP TIMER

(1)Setting the sleep timer (remote control unit only)

The included remote control unit can be used to turn the power to the standby mode after a maximum of 120 minutes. (Sleep timer)

Use this function to automatically switch the power to the standby mode after a specific amount of time (minutes).

Example: To set the power to the standby mode in 50 minutes according to the clock. Be sure to correct the current time setting.

• Operate the remote control unit at the “AMP” position.

Set the remote

2, 3

control selector

switches Switch1 to DVD Switch2 to AMP

1

Select and play the desired function.

 

 

2

Press the SLEEP button.

 

 

 

 

“120” is displayed and the “SLEEP” indicator flashes.

 

 

 

120

 

 

 

 

 

 

 

 

 

 

 

 

 

Remote control unit

 

 

The display switches as follows each time the SLEEP

 

 

button is pressed:

 

 

 

 

 

 

 

120

90

60

50

40

30

20

10

3

 

 

 

“SLEEP” indicator off

 

 

 

When the “SLEEP” indicator is flashing, press the SLEEP

 

 

button again until “50” is displayed.

 

 

 

“50” is displayed and the “SLEEP” indicator flashes.

4

The power is set to the standby mode 50 minutes later.

To turn the sleep timer off, press the SLEEP button repeatedly until the “SLEEP” indicator turns off. The sleep timer can also be turned off by press the power button on the main unit or the remote control unit to turn the entire system’s power to the standby mode.

Remote control unit

Main unit

Remote control unit

50

Remote control unit

After 4 seconds, the display returns to as it was before the sleep timer was set, and the “SLEEP” indicator stops flashing, remaining lit. (This completes the sleep timer setting.)

53