INSPECTING BURNER
Continued
BURNER FLAME PATTERN
Figure 32 shows a correct burner flame pattern. Figure 33 shows an incorrect burner flame pattern. The incorrect burner flame pattern shows yellow tipping of the flame. It also shows the flame higher than one inch above the log.
Note: When using the heater the first time, the flame will be yellow for approxi- mately one hour until the log cures.
WARNING
WARNING ICON | G 001 |
If yellow tipping occurs, your heater could produce increased levels of carbon monoxide. If burner flame pattern shows yellow tipping, follow instructions at bottom of this page.
NOTICE
Do not mistake orange flames with yellow tipping. Dirt or other fine particles enter the heater and burn causing brief patches of orange flame.
Top of
Flame
About One
Inch Above
Logs
CORRECT FLAME PATTERN
AT HIGH POSITION
Figure 32 - Correct Burner Flame Pattern
Yellow |
Tipping |
INCORRECT FLAME PATTERN
AT HIGH POSITION
Figure 33 - Incorrect Burner Flame Pattern
If burner flame pattern is incorrect, as shown in Figure 33
•turn heater off (see To Turn Off Gas to Appliance, page 25).
•see Troubleshooting, pages 28 through 31.
101935
27
