Desa Td125, Td126, Td127, Td128 Continued, Attaching Tank Door, Installing Cylinder Cap

Models: Td125, Td126, Td127, Td128

1 48
Download 48 pages 40.26 Kb
Page 6
Image 6
Figure 5 - Attaching Tank Door

Assembly

Continued

6.Install tank door by placing cutouts on sides over screws installed in step 5 (see Figure 5).

7.Slide propane/LP cylinder top down pole and over pole support (see Figure 6). Be sure that propane/LP cylinder top rests level on base.

Note: A cap support is provided on pole support to lift top when changing propane/ LP cylinder.

8.Remove 4 screws in bottom of emitter.

Place burner assembly on emitter and align holes. Replace screws. See Figures

7 and 8.

Burner

Cutout inAssembly

Tank Door

Figure 7 - Placing Burner Assembly OntoEmitter

Figure 5 - Attaching Tank Door

Figure 7 - Placing Burner Assembly Onto

Emitter

Cylinder Cap

Cap Support

Figure 8 - Attaching Burner Assembly

and Emitter

Figure 6 - Installing Cylinder Cap

www.desatech.com121117-01B

Page 6
Image 6
Desa Td125, Td126, Td127, Td128 owner manual Continued, Attaching Tank Door, Placing Burner Assembly Onto Emitter