DirecTV SAT GO manual Video

Setting Up Your DIRECTV® Sat-Go

Connecting your DIRECTV Sat-Go system to a second TV or Monitor

The DIRECTV Sat-Go system has a special signal output capability that allows you to connect a second TV or monitor to your DIRECTV Sat-Go TV.

1.Connect the video cable to the video input jack on the second TV or monitor and to the video output jack (AV OUT) on the DIRECTV Sat-Go TV rear connector panel.

2.Connect the audio cable to the audio input jacks (L/R) on the second TV or monitor and to the audio output jacks (AV OUT) on the DIRECTV Sat-Go TV rear connector panel.

AV IN S-VIDEO COMPONENT

R - AUDIO - L VIDEO

	COMPONENT
AV IN 1	AV IN 2

NOTES:

-Neither AV IN 1 nor AV IN 2 can be used for the second TV or monitor out.

-See the Operating Manual of the second TV or monitor for further details regarding that device’s input settings.

28