DVD PLAYER OPERATION
2-CHANNEL ~ 5.1-CHANNEL SETUP
■When the unit is set to
Note:
■The volume of
PAUSE & PLAYBACK
■Press the [PAUSE] button to pause playback.
■Press it again to resume normal playback.
START & STOP PLAYBACK
■Press the [ENTER/PLAY] button to start playback of the disc.
■Press [6/STOP] button to stop playback of the disc.
SKIP PLAYBACK
■Press the [
] button to skip to the next track/chapter and playback from there.
■Press the [
] button to skip backwards to the previous section/chapter and begin play- back from there.
Note:
■When a VCD disc is loaded and PBC is turned ON, this function will not work.
REPEAT PLAYBACK
■Press the [5/REPT] button once to repeat playback the current Chapter/Track.
■Press it once more to repeat playback of the whole Title/Disc.
■Press it a third time to cancel the repeat playback function.
RANDOM/SCAN PLAYBACK
■Repeatedly press the [3/P.MODE] button to switch among Random/Scan and Normal playback modes according to the following sequence: Random
Scan
Normal
■The “Scan” playback function will play the beginning of each track for roughly 10 sec and then continue to play the next track/section.
SELECT CHAPTER/TRACK OR PLAY TIME
■Press the [GOTO] button on the remote control to select the play time (for CD/VCD) or select the desired chapter (for DVD).
■Then press the direction button to select different content or use the numeric keys to enter a chapter number or time data (if there is no operation within 5 sec, the unit will exit this mode.)
■In DVD mode, press the button again to select playtime of the title, which will be indicated on monitor.
Note:
■If you’re using CD discs, you can also directly press a number button on the remote con- trol to select a certain track, and you don’t need to press the [GOTO] button first, to use this function.
19
