Dolby Laboratories ZE-200DVD, DVD & MP3 operation manual Installation Procedure, Unit Installation

INSTALLATION & CONNECTION

INSTALLATION PROCEDURE

Unit Installation

If your vehicle has a 1-DIN cutout in the dashboard, you can mount this DVD headunit direct- ly without any further modifications.

■Disconnect the power wire from the negative (-) battery terminal before you start any wiring work.

■Insert the metal mounting bracket into the dashboard and bend the mounting tabs outwards with a screwdriver.

■Connect mounting bolt with a proper spanner.

■Check all audio connections and the necessary wiring according to the speci- fication of the mounted devices.

■Insert ISO-DIN power connector to the ISO plug of your car.

■Insert the headunit into the mounting Bracket and push it back until you hear the unit lock in place.

■Use the provided screw (Bt5×16) to fix the other side of the assembly bar with the car body (optional).

■Attach the plastic trim ring to the unit.

Note:

■Be sure not to scratch and wound your fingers when bending the mounting tabs of the mounting bracket with a screwdri- ver.

27