INSTALLATION & CONNECTION
INSTALLATION NOTES
■If possible, get this unit installed by a qualified dealer/installer.
■Before mounting this unit to the dashboard, properly connect all wires and check if the unit and all peripheral devices work as intended.
■Use only the mounting hardware supplied with the set contents to ensure proper installati- on. The use of unauthorized parts can cause malfunctions and/or damage.
■Consult your dealer if the installation requires the drilling of holes or other modifications to the vehicle.
■Install the unit where it does not get in the driver’s way and where it cannot injure passen- gers upon a sudden stop or accident.
■The semiconductor laser will be damaged if it overheats, so don’t install the unit in places exposed to heat, for example near a heater outlet.
■Power supply for the unit is 12V DC with negative
■Carefully read the operating and installation manual, before attempting the installation of this unit. Please connect electric parts according to the depicted diagrams. Incorrect con- nections may damage the equipment or parts of it.
■Do not insert the power supply connector before all other connectons have been made.
■Do insulate exposed wires to prevent short circuits against vehicle ground.
■This headunit is compatible with
■Refer to the instruction manual of SANYO
ACCESSORIES AND HARDWARE
26
