INSTALLATION & CONNECTION
OUTPUT POWER AMPLIFIER CONNECTION:
■Connect an external power amplifier correctly according to the following connection dia- gram. Incorrect connection will cause incorrect soundstage and also may cause damage to the speakers.
Note:
In tuner, AUX or DVD stereo mode, the
In
FUSE
■The inline fuse is rated 10A. If it needs to be replaced, please only use a identical fuse with identical rating and specs. A wrong fuse value can easily cause a fire or damage the installed equipment.
TROUBLESHOOTING
■If such problem arises during your usage, the troubleshooting guide will settle down all your problems immediately. If it still doesn’t work, please contact professional technici- ans to perform.
Symptom | Cause | Action | |
| Leads and connectors are incorrectly | Confirm once more that all connections | |
| are correct. | ||
| connected. | ||
| Press [reset] button again. | ||
|
| ||
|
|
| |
Power doesn’t turn on. The unit |
| Rectify the reason for the fuse blowing. | |
doesn’t operate. | The fuse is blown. | Then replace the fuse. Be sure to | |
|
| replace the fuse with the same rating. | |
|
|
| |
| Noise and other factors are causing | Turn the unit off and then on. | |
| the | ||
|
| ||
| Press [reset] button | ||
| incorrectly. | ||
|
| ||
Operation with the remote control | Battery power is low. | Load a new battery. | |
isn’t possible. The unit does not | |||
|
| ||
operate correctly even when | Some operations are prohibited with |
| |
the appropriate remote control | Retry using another disc. | ||
certain DVD discs. | |||
buttons are pressed. |
| ||
|
|
30
