Dolby Laboratories ZE-200DVD Speaker Connection, Left+ Right+ Front Speaker, Rear Speaker

INSTALLATION & CONNECTION

SPEAKER CONNECTION

	Left+	Left-	Right+	Right-
Front Speaker	White	White/Black	Gray	Gray/Black
Rear Speaker	Green	Green/Black	Violet	Violet/Black

Note:

■Do only use groundless speaker systems (TWO wires for each speaker!).

■Input power of used speakers must be over 45W, or damage may result.

■Speaker impedance: 4Ω

■Speakers with an impedance too big or too small may affect output power and/or damage the unit or the speakers.

■Do not use 3-cable speaker systems and do not connect speakers to the car body. This unit uses BTL amp circuit and thus, the speakers installed must be connected to this unit with their positive and negative wires.

■Speaker wires and separate power amplifier(s) must keep a distance of about 30CM from the antenna and the antenna extension leads.

■Connect the speakers according to the following diagram. Incorrect connection will dama- ge this unit (or the speakers).

Correct wires connection

Wrong wires connection

29