Operating Controls | STUDENT MICROPHONE |
(1A) Momentary power switch– Push to Talk.
(1B) Continuous power switch– Slide up to lock on and then talk.
(2)Power indicator
(3)Microphone (audio pickup) - speak into this
part of the microphone.
(4)Infrared signal emitters — the infrared signal is broadcast from multiple infrared signal emitters.
(5)Battery case— Slide the battery cover down to remove.
(6)Charging
(7)Charging
Charging: Solid steady ON
Finished Charging: OFF
Charging error (trying to charge an alka- line battery : Flashing very fast
(8)External Auxiliary input terminal (on the side) - Used to connect a CD or MP3 player or other device. Allows the user to wirelessly connect a source to the system.
(9)Single “AA” NiMH rechargeable battery or non- rechargeable Alkaline battery.
(10)Channel assignment switch. Channel switch (inside the battery case) - Set the channel of the infra- red wireless microphone to the desired channel.
◎Channels 1 or 2 for use with Achiever,
Ultimate II, Innovator. Channels 1 through 4 for use with Innovator..
3 |
|
7 | 4 |
2 | 8 |
1A
1B | 5 |
| |
| 10 |
| 9 |
6
To change the battery:
1.Slide the rear cover(5) down towards the bottom of the microphone.
2.Replace battery with a standard “AA” NiMH rechargeable.
Note: A standard “AA” Alkaline cell can be used on a temporary basis.
●Uses two Panasonic NIMH AA rechargeable batter-
22